[PATCH] dt-bindings: fpga: convert Xilinx Zynq MPSoC bindings to YAML

[Nobuhiro Iwamatsu]

Hi,

Thanks for your review.

2021年7月15日(木) 22:18 Tom Rix <trix at redhat.com>:
>
>
> On 7/15/21 3:02 AM, Nobuhiro Iwamatsu wrote:
> > Convert FPGA Manager for Xilinx Zynq MPSoC bindings documentation to
> > YAML.
> >
> > Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> > ---
> >   .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt   | 25 -------------
> >   .../bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml  | 36 +++++++++++++++++++
> >   2 files changed, 36 insertions(+), 25 deletions(-)
> >   delete mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> >   create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> > deleted file mode 100644
> > index 3052bf619dd547..00000000000000
> > --- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> > +++ /dev/null
> > @@ -1,25 +0,0 @@
> > -Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
> > -The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
> > -Programmable Logic (PL). The configuration uses  the firmware interface.
> > -
> > -Required properties:
> > -- compatible: should contain "xlnx,zynqmp-pcap-fpga"
> > -
> > -Example for full FPGA configuration:
> > -
> > -     fpga-region0 {
> > -             compatible = "fpga-region";
> > -             fpga-mgr = <&zynqmp_pcap>;
> > -             #address-cells = <0x1>;
> > -             #size-cells = <0x1>;
> > -     };
> > -
> > -     firmware {
> > -             zynqmp_firmware: zynqmp-firmware {
> > -                     compatible = "xlnx,zynqmp-firmware";
> > -                     method = "smc";
> > -                     zynqmp_pcap: pcap {
> > -                             compatible = "xlnx,zynqmp-pcap-fpga";
> > -                     };
> > -             };
> > -     };
> > diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
> > new file mode 100644
> > index 00000000000000..565b835b7fbac0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
> > @@ -0,0 +1,36 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
> > +
> > +maintainers:
> > +  - Michal Simek <michal.simek at xilinx.com>
> Needs a change to MAINTAINERS ?

My bad. I will change to correct maintainer.
> > +
> > +description: |
> > +  Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
> > +  The ZynqMP SoC uses the PCAP (Processor configuration Port) to
>
> Configuration

I will update v2.

Best regards,
  Nobuhiro


-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6