[PATCH v3] iio: adc: stm32-adc: enable timestamping for non-DMA usage

[Marc Kleine-Budde]

On 1/25/21 12:21 PM, Ahmad Fatoum wrote:
> For non-DMA usage, we have an easy way to associate a timestamp with a
> sample: iio_pollfunc_store_time stores a timestamp in the primary
> trigger IRQ handler and stm32_adc_trigger_handler runs in the IRQ thread
> to push out the buffer along with the timestamp.
> 
> For this to work, the driver needs to register an IIO_TIMESTAMP channel.
> Do this.
> 
> For DMA, it's not as easy, because we don't push the buffers out of
> stm32_adc_trigger, but out of stm32_adc_dma_buffer_done, which runs in
> a tasklet scheduled after a DMA completion.
> 
> Preferably, the DMA controller would copy us the timestamp into that buffer
> as well. Until this is implemented, restrict timestamping support to
> only PIO. For low-frequency sampling, PIO is probably good enough.
> 
> Cc: Holger Assmann <has at pengutronix.de>
> Acked-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> v2 -> v3:
>   - explicitly specify alignment (Jonathan)
>   - increase buffer size to hold additional timestamp
> v1 -> v2:
>   - Added comment about timestamping being PIO only (Fabrice)
>   - Added missing DMA resource clean up in error path (Fabrice)
>   - Added Fabrice's Acked-by
> ---
>  drivers/iio/adc/stm32-adc.c | 39 +++++++++++++++++++++++++++++--------
>  1 file changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index c067c994dae2..ab2f440d7afb 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -177,7 +177,7 @@ struct stm32_adc_cfg {
>   * @offset:		ADC instance register offset in ADC block
>   * @cfg:		compatible configuration data
>   * @completion:		end of single conversion completion
> - * @buffer:		data buffer
> + * @buffer:		data buffer + 8 bytes for timestamp if enabled
                                      ^
>   * @clk:		clock for this adc instance
>   * @irq:		interrupt for this adc instance
>   * @lock:		spinlock
> @@ -200,7 +200,7 @@ struct stm32_adc {
>  	u32			offset;
>  	const struct stm32_adc_cfg	*cfg;
>  	struct completion	completion;
> -	u16			buffer[STM32_ADC_MAX_SQ];
> +	u16			buffer[STM32_ADC_MAX_SQ + 8] __aligned(8);
         ^^                                               ^

How does that fit together?

Marc


-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210125/90eeb07a/attachment.sig>