[PATCH] arm64: dts: stingray: remove sata
Scott Branden
scott.branden at broadcom.com
Wed Jan 20 13:51:40 EST 2021
Remove sata from stingray as it is unsupported.
Signed-off-by: Scott Branden <scott.branden at broadcom.com>
---
.../dts/broadcom/stingray/bcm958742-base.dtsi | 64 ----
.../dts/broadcom/stingray/stingray-sata.dtsi | 278 ------------------
.../boot/dts/broadcom/stingray/stingray.dtsi | 7 -
3 files changed, 349 deletions(-)
delete mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 43aa5e9c0020..8fe7325cfbb2 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -56,70 +56,6 @@
};
};
-&sata0 {
- status = "okay";
-};
-
-&sata_phy0{
- status = "okay";
-};
-
-&sata1 {
- status = "okay";
-};
-
-&sata_phy1{
- status = "okay";
-};
-
-&sata2 {
- status = "okay";
-};
-
-&sata_phy2{
- status = "okay";
-};
-
-&sata3 {
- status = "okay";
-};
-
-&sata_phy3{
- status = "okay";
-};
-
-&sata4 {
- status = "okay";
-};
-
-&sata_phy4{
- status = "okay";
-};
-
-&sata5 {
- status = "okay";
-};
-
-&sata_phy5{
- status = "okay";
-};
-
-&sata6 {
- status = "okay";
-};
-
-&sata_phy6{
- status = "okay";
-};
-
-&sata7 {
- status = "okay";
-};
-
-&sata_phy7{
- status = "okay";
-};
-
&pwm {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
deleted file mode 100644
index 8c68e0c26f1b..000000000000
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2016-2017 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
- sata {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x67d00000 0x00800000>;
-
- sata0: ahci at 0 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00000000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata0_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata0_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy0: sata_phy at 2100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00002100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata0_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata1: ahci at 10000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00010000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata1_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata1_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy1: sata_phy at 12100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00012100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata1_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata2: ahci at 20000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00020000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata2_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata2_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy2: sata_phy at 22100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00022100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata2_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata3: ahci at 30000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00030000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata3_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata3_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy3: sata_phy at 32100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00032100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata3_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata4: ahci at 100000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00100000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata4_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata4_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy4: sata_phy at 102100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00102100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata4_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata5: ahci at 110000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00110000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata5_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata5_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy5: sata_phy at 112100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00112100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata5_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata6: ahci at 120000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00120000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata6_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata6_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy6: sata_phy at 122100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00122100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata6_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
-
- sata7: ahci at 130000 {
- compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00130000 0x1000>;
- reg-names = "ahci";
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata7_port0: sata-port at 0 {
- reg = <0>;
- phys = <&sata7_phy0>;
- phy-names = "sata-phy";
- };
- };
-
- sata_phy7: sata_phy at 132100 {
- compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00132100 0x1000>;
- reg-names = "phy";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata7_phy0: sata-phy at 0 {
- reg = <0>;
- #phy-cells = <0>;
- };
- };
- };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index b425b12c3ed2..2ffb2c92182a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -285,7 +285,6 @@
};
#include "stingray-fs4.dtsi"
- #include "stingray-sata.dtsi"
#include "stingray-pcie.dtsi"
#include "stingray-usb.dtsi"
@@ -309,12 +308,6 @@
#size-cells = <0>;
};
- mdio at 2 { /* SATA */
- reg = <0x2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
mdio at 3 { /* USB */
reg = <0x3>;
#address-cells = <1>;
--
2.17.1
More information about the linux-arm-kernel
mailing list