[PATCH 04/19] dt-bindings: bridge: simple: Add corpro, gm7123 compatible

[Chen-Yu Tsai]

On Mon, Jan 18, 2021 at 6:03 PM Maxime Ripard <maxime at cerno.tech> wrote:
>
> Hi Laurent,
>
> On Fri, Jan 15, 2021 at 09:16:30AM +0200, Laurent Pinchart wrote:
> > Thank you for the patch.
> >
> > On Thu, Jan 14, 2021 at 12:35:23PM +0100, Maxime Ripard wrote:
> > > The corpro,gm7123 was in use in a DT but was never properly documented,
> > > let's add it.
> > >
> > > Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > > Cc: Sam Ravnborg <sam at ravnborg.org>
> > > Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> > > ---
> > >  .../devicetree/bindings/display/bridge/simple-bridge.yaml     | 4 ++++
> > >  1 file changed, 4 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> > > index 64e8a1c24b40..97ca07b56cbc 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> > > +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
> > > @@ -22,6 +22,10 @@ properties:
> > >                - ti,ths8134a
> > >                - ti,ths8134b
> > >            - const: ti,ths8134
> > > +      - items:
> > > +          - const: corpro,gm7123
> > > +          - const: adi,adv7123
> >
> > Do we need adi,adv7123 ?
>
> I'm not sure: it looks like having both the adv7123 and the dumb-vga-dac
> compatible was never an option, so we can also change the DT to have
> corpro,gm7123, dumb-vga-dac

FYI I used the adi,adv7123 fallback because the gm7123 datasheet compares
the two, with the gm7123 having lower standby current, but only limited to
3.3V power supply. Maximum resolution, conversion rate, and the range of
output current are all the same. The package is the same as well. I
believe the gm7123 is intended as a drop-in clone of the adv7123.

ChenYu