[PATCH v4 4/5] gpio: mvebu: don't limit pwm period/duty_cycle to UINT_MAX

[Baruch Siach]

PWM on/off registers are limited to UINT_MAX. However the state period
and duty_cycle fields are ns values of type u64. There is no reason to
limit them to UINT_MAX.

Reported-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 drivers/gpio/gpio-mvebu.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 8673ba77af5a..6b017854ce61 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -669,9 +669,7 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_on_duration(mvpwm), &u);
 	val = (unsigned long long) u * NSEC_PER_SEC;
 	val = DIV_ROUND_UP_ULL(val, mvpwm->clk_rate);
-	if (val > UINT_MAX)
-		state->duty_cycle = UINT_MAX;
-	else if (val)
+	if (val)
 		state->duty_cycle = val;
 	else
 		state->duty_cycle = 1;
@@ -681,9 +679,7 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
 	val += (unsigned long long) u; /* period = on + off duration */
 	val *= NSEC_PER_SEC;
 	val = DIV_ROUND_UP_ULL(val, mvpwm->clk_rate);
-	if (val > UINT_MAX)
-		state->period = UINT_MAX;
-	else if (val)
+	if (val)
 		state->period = val;
 	else
 		state->period = 1;
-- 
2.29.2