[PATCH v4 3/5] gpio: mvebu: make pwm .get_state closer to idempotent

[Baruch Siach]

Round up the divisions in .get_state() to make applying the read out
configuration idempotent in most cases as .apply rounds down.

Reported-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 drivers/gpio/gpio-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index c424d88e9e2b..8673ba77af5a 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -668,7 +668,7 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
 
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_on_duration(mvpwm), &u);
 	val = (unsigned long long) u * NSEC_PER_SEC;
-	do_div(val, mvpwm->clk_rate);
+	val = DIV_ROUND_UP_ULL(val, mvpwm->clk_rate);
 	if (val > UINT_MAX)
 		state->duty_cycle = UINT_MAX;
 	else if (val)
@@ -680,7 +680,7 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_off_duration(mvpwm), &u);
 	val += (unsigned long long) u; /* period = on + off duration */
 	val *= NSEC_PER_SEC;
-	do_div(val, mvpwm->clk_rate);
+	val = DIV_ROUND_UP_ULL(val, mvpwm->clk_rate);
 	if (val > UINT_MAX)
 		state->period = UINT_MAX;
 	else if (val)
-- 
2.29.2