[PATCH v1 16/17] arm64: dts: sdm845-db845c: Add CAMSS ISP node

[Robert Foss]

Thanks Laurent!

On Sat, 9 Jan 2021 at 02:47, Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Rob,
>
> Thank you for the patch.
>
> The subject line doesn't match the patch.
>
> On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote:
> > Add regulators and camss DT node.
> >
> > Signed-off-by: Robert Foss <robert.foss at linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > index a943b3f353ce..7bad0515345e 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 {
> >                       regulator-max-microvolt = <1028000>;
> >               };
> >
> > +             vdda_mipi_csi0_0p9:
> > +             vdda_mipi_csi1_0p9:
> > +             vdda_mipi_csi2_0p9:
>
> No need for new labels, you can simply use vreg_l1a_0p875 below.

Ack

>
> >               vreg_l1a_0p875: ldo1 {
> >                       regulator-min-microvolt = <880000>;
> >                       regulator-max-microvolt = <880000>;
> > @@ -1106,6 +1109,15 @@ &cci {
> >       status = "okay";
> >  };
> >
> > +&camss {
> > +     vdda-csi0-supply = <&vdda_mipi_csi0_0p9>;
> > +     vdda-csi1-supply = <&vdda_mipi_csi1_0p9>;
> > +     vdda-csi2-supply = <&vdda_mipi_csi2_0p9>;
> > +
> > +     status = "disabled";
>
> This isn't needed.

Ack

>
> > +
>
> Extra blank line.

Ack

>
> > +};
> > +
> >  &cci_i2c0 {
> >       camera at 10 {
> >               compatible = "ovti,ov8856";
>
> --
> Regards,
>
> Laurent Pinchart