[PATCH v1 17/17] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP

[Robert Foss]

Enable camss & ov8856 DT nodes.

Signed-off-by: Robert Foss <robert.foss at linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7bad0515345e..94a15d4bd05d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1114,8 +1114,20 @@ &camss {
 	vdda-csi1-supply = <&vdda_mipi_csi1_0p9>;
 	vdda-csi2-supply = <&vdda_mipi_csi2_0p9>;
 
-	status = "disabled";
+	status = "ok";
 
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port at 0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
 };
 
 &cci_i2c0 {
@@ -1147,7 +1159,7 @@ camera at 10 {
 		avdd-supply = <&cam0_avdd_2v8>;
 		dvdd-supply = <&cam0_dvdd_1v2>;
 
-		status = "disable";
+		status = "ok";
 
 		port {
 			ov8856_ep: endpoint {
@@ -1155,7 +1167,7 @@ ov8856_ep: endpoint {
 				link-frequencies = /bits/ 64
 					<360000000 180000000>;
 				data-lanes = <1 2 3 4>;
-//				remote-endpoint = <&csiphy0_ep>;
+				remote-endpoint = <&csiphy0_ep>;
 			};
 		};
 	};
-- 
2.27.0