[PATCH 0/6] Support second Image Signal Processor on rk3399
Heiko Stübner
heiko at sntech.de
Wed Feb 3 14:54:32 EST 2021
Hi Sebastian,
Am Mittwoch, 3. Februar 2021, 19:14:22 CET schrieb Sebastian Fricke:
> Hey Heiko,
>
> I have tested your patch set on my nanoPC-T4, here is a complete log
> with:
> - relevant kernel log entries
> - system information
> - media ctl output
> - sysfs entry information
>
> https://paste.debian.net/1183874/
>
> Additionally, to your patchset I have applied the following patches:
> https://github.com/initBasti/Linux_kernel_media_tree_fork/commits/dual_cam_setup
>
> And just to not cause confusion the `media_dev` entries come from this
> unmerged series:
> https://patchwork.kernel.org/project/linux-media/list/?series=426269
>
> I have actually been able to stream with both of my cameras at the same
> time using the libcamera cam command.
> I would like to thank you a lot for making this possible.
Thanks for testing a dual camera setup. On my board I could only test
the second ISP. And really glad it works for you tool :-) .
Out of curiosity, do you also see that green tint in the images the cameras
produce?
Thanks
Heiko
> If you like to you can add:
> Tested-by: Sebastian Fricke <sebastian.fricke at posteo.net>
>
> On 02.02.2021 15:56, Heiko Stuebner wrote:
> >The rk3399 has two ISPs and right now only the first one is usable.
> >The second ISP is connected to the TXRX dphy on the soc.
> >
> >The phy of ISP1 is only accessible through the DSI controller's
> >io-memory, so this series adds support for simply using the dsi
> >controller is a phy if needed.
> >
> >That solution is needed at least on rk3399 and rk3288 but no-one
> >has looked at camera support on rk3288 at all, so right now
> >only implement the rk3399 specifics.
> >
> >
> >Heiko Stuebner (6):
> > drm/rockchip: dsi: add own additional pclk handling
> > dt-bindings: display: rockchip-dsi: add optional #phy-cells property
> > drm/rockchip: dsi: add ability to work as a phy instead of full dsi
> > arm64: dts: rockchip: add #phy-cells to mipi-dsi1
> > arm64: dts: rockchip: add cif clk-control pinctrl for rk3399
> > arm64: dts: rockchip: add isp1 node on rk3399
> >
> > .../display/rockchip/dw_mipi_dsi_rockchip.txt | 1 +
> > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 39 ++
> > drivers/gpu/drm/rockchip/Kconfig | 2 +
> > .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 342 ++++++++++++++++++
> > 4 files changed, 384 insertions(+)
> >
>
More information about the linux-arm-kernel
mailing list