[PATCH 19/24] arm64: dts: exynos: align pinctrl with dtschema in Exynos850

Krzysztof Kozlowski krzysztof.kozlowski at canonical.com
Fri Dec 31 08:23:04 PST 2021


Align the pin controller related nodes with dtschema.  No functional
change expected.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
 .../boot/dts/exynos/exynos850-pinctrl.dtsi    | 52 +++++++++----------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
index f576b29c9b16..a71acf358d2d 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -13,7 +13,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_alive {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -30,7 +30,7 @@ gpa0: gpa0 {
 			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -47,7 +47,7 @@ gpa1: gpa1 {
 			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -64,7 +64,7 @@ gpa2: gpa2 {
 			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa3: gpa3 {
+	gpa3: gpa3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -81,7 +81,7 @@ gpa3: gpa3 {
 			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa4: gpa4 {
+	gpa4: gpa4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -94,7 +94,7 @@ gpa4: gpa4 {
 			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpq0: gpq0 {
+	gpq0: gpq0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@ uart1_pins: uart1-pins {
 };
 
 &pinctrl_cmgp {
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -144,7 +144,7 @@ gpm0: gpm0 {
 		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -154,7 +154,7 @@ gpm1: gpm1 {
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -164,7 +164,7 @@ gpm2: gpm2 {
 		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -174,7 +174,7 @@ gpm3: gpm3 {
 		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -184,7 +184,7 @@ gpm4: gpm4 {
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpm5: gpm5 {
+	gpm5: gpm5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -256,7 +256,7 @@ spi2_pins: spi2-pins {
 };
 
 &pinctrl_aud {
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -264,7 +264,7 @@ gpb0: gpb0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -322,7 +322,7 @@ aud_fm_idle_pins: aud-fm-idle-pins {
 };
 
 &pinctrl_hsi {
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -367,7 +367,7 @@ sd2_pdn_pins: sd2-pdn-pins {
 };
 
 &pinctrl_core {
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -375,7 +375,7 @@ gpf0: gpf0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -434,7 +434,7 @@ sd0_bus8_pins: sd0-bus8-pins {
 };
 
 &pinctrl_peri {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -442,7 +442,7 @@ gpc0: gpc0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -450,7 +450,7 @@ gpc1: gpc1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -458,7 +458,7 @@ gpg0: gpg0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -466,7 +466,7 @@ gpg1: gpg1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -474,7 +474,7 @@ gpg2: gpg2 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -482,14 +482,14 @@ gpg3: gpg3 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp0: gpp0 {
+	gpp0: gpp0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
-	gpp1: gpp1 {
+	gpp1: gpp1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -497,7 +497,7 @@ gpp1: gpp1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp2: gpp2 {
+	gpp2: gpp2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
-- 
2.32.0




More information about the linux-arm-kernel mailing list