[PATCH 20/24] arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9

Krzysztof Kozlowski krzysztof.kozlowski at canonical.com
Fri Dec 31 08:23:05 PST 2021


Align the pin controller related nodes with dtschema.  No functional
change expected.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 50 +++++++++----------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
index 2407b03b5404..ef0349d1c3d0 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -11,7 +11,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_alive {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -27,7 +27,7 @@ gpa0: gpa0 {
 			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -47,7 +47,7 @@ dp1_hpd: dp1-hpd-pins {
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	gpq0: gpq0 {
+	gpq0: gpq0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -69,7 +69,7 @@ speedy1_bus: speedy1-bus-pins {
 };
 
 &pinctrl_aud {
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -77,7 +77,7 @@ gpb0: gpb0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -85,7 +85,7 @@ gpb1: gpb1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -93,7 +93,7 @@ gpb2: gpb2 {
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -199,7 +199,7 @@ aud_i2s6_idle: aaud-i2s6-idle-pins {
 };
 
 &pinctrl_fsys0 {
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -207,7 +207,7 @@ gpf0: gpf0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@ pcie_perst5_in: pcie-perst5-in-pins {
 };
 
 &pinctrl_fsys1 {
-	gpf8: gpf8 {
+	gpf8: gpf8-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -393,7 +393,7 @@ sd2_bus4: sd2-bus-width4-pins {
 };
 
 &pinctrl_fsys2 {
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -401,7 +401,7 @@ gpf2: gpf2 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -409,7 +409,7 @@ gpf3: gpf3 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf4: gpf4 {
+	gpf4: gpf4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -417,7 +417,7 @@ gpf4: gpf4 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf5: gpf5 {
+	gpf5: gpf5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -425,7 +425,7 @@ gpf5: gpf5 {
 		#interrupt-cells = <2>;
 	};
 
-	gpf6: gpf6 {
+	gpf6: gpf6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -499,7 +499,7 @@ eth1_pps_out: eth1-pps-out-pins {
 };
 
 &pinctrl_peric0 {
-	gpp0: gpp0 {
+	gpp0: gpp0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -507,7 +507,7 @@ gpp0: gpp0 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp1: gpp1 {
+	gpp1: gpp1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -515,7 +515,7 @@ gpp1: gpp1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp2: gpp2 {
+	gpp2: gpp2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -523,7 +523,7 @@ gpp2: gpp2 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -833,7 +833,7 @@ uart5_bus_dual: uart5-bus-dual-pins {
 };
 
 &pinctrl_peric1 {
-	gpp3: gpp3 {
+	gpp3: gpp3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -841,7 +841,7 @@ gpp3: gpp3 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp4: gpp4 {
+	gpp4: gpp4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -849,7 +849,7 @@ gpp4: gpp4 {
 		#interrupt-cells = <2>;
 	};
 
-	gpp5: gpp5 {
+	gpp5: gpp5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -857,7 +857,7 @@ gpp5: gpp5 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -865,7 +865,7 @@ gpg1: gpg1 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -873,7 +873,7 @@ gpg2: gpg2 {
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
-- 
2.32.0




More information about the linux-arm-kernel mailing list