[PATCH] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt

Lad Prabhakar prabhakar.mahadev-lad.rj at bp.renesas.com
Sat Dec 18 07:39:43 PST 2021


platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
Hi,

Dropping usage of platform_get_resource() was agreed based on
the discussion [0].

[0] https://patchwork.kernel.org/project/linux-renesas-soc/
patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj at bp.renesas.com/

Cheers,
Prabhakar
---
 drivers/soc/ti/smartreflex.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index b5b2fa538d5c..4f311e00fa46 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -819,7 +819,7 @@ static int omap_sr_probe(struct platform_device *pdev)
 {
 	struct omap_sr *sr_info;
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct resource *mem, *irq;
+	struct resource *mem;
 	struct dentry *nvalue_dir;
 	int i, ret = 0;
 
@@ -844,7 +844,12 @@ static int omap_sr_probe(struct platform_device *pdev)
 	if (IS_ERR(sr_info->base))
 		return PTR_ERR(sr_info->base);
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	ret = platform_get_irq_optional(pdev, 0);
+	if (ret <= 0 && ret != -ENXIO)
+		return ret ? ret : -ENXIO;
+	if (ret > 0)
+		sr_info->irq = ret;
+	ret = 0;
 
 	sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
 	if (IS_ERR(sr_info->fck))
@@ -870,9 +875,6 @@ static int omap_sr_probe(struct platform_device *pdev)
 	sr_info->autocomp_active = false;
 	sr_info->ip_type = pdata->ip_type;
 
-	if (irq)
-		sr_info->irq = irq->start;
-
 	sr_set_clk_length(sr_info);
 
 	list_add(&sr_info->node, &sr_list);
-- 
2.17.1




More information about the linux-arm-kernel mailing list