[PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source

[Biwen Li]

> -----Original Message-----
> From: Leo Li <leoyang.li at nxp.com>
> Sent: 2021年12月14日 14:17
> To: Shawn Guo <shawnguo at kernel.org>
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Biwen
> Li <biwen.li at nxp.com>
> Subject: RE: [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be
> used as wakeup source
> 
> 
> 
> > -----Original Message-----
> > From: Shawn Guo <shawnguo at kernel.org>
> > Sent: Tuesday, December 14, 2021 1:46 PM
> > To: Leo Li <leoyang.li at nxp.com>
> > Cc: linux-arm-kernel at lists.infradead.org;
> > linux-kernel at vger.kernel.org; Biwen Li <biwen.li at nxp.com>
> > Subject: Re: [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node
> > to be used as wakeup source
> >
> > On Fri, Dec 03, 2021 at 06:17:12PM -0600, Li Yang wrote:
> > > From: Biwen Li <biwen.li at nxp.com>
> > >
> > > Add flextimer2 based ftm_alarm1 node and enable it to be the default
> > > rtc wakeup source for rdb and qds boards instead of the original
> > > flextimer1 based ftm_alarm0.  The ftm_alarm0 node hence is disabled
> > > by
> > default.
> >
> > What's wrong with using ftm_alarm0?
> 
> Not 100% sure, but probably because we need to use flextimer1 as PWM.
>>> Yes, flextime1 is used as PWM. So use flextimer2 as rtc.
> 
> Biwen,  Can you comment?
> 
> >
> > Shawn
> >
> > >
> > > Signed-off-by: Biwen Li <biwen.li at nxp.com>
> > > Signed-off-by: Li Yang <leoyang.li at nxp.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++-
> > > arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++-
> > >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 9 +++++++++
> > >  3 files changed, 19 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > > index 6e2a1da662fb..00d5b81bdef3 100644
> > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > > @@ -25,7 +25,7 @@ aliases {
> > >  		serial1 = &duart1;
> > >  		mmc0 = &esdhc;
> > >  		mmc1 = &esdhc1;
> > > -		rtc1 = &ftm_alarm0;
> > > +		rtc1 = &ftm_alarm1;
> > >  	};
> > >
> > >  	chosen {
> > > @@ -234,6 +234,10 @@ mt35xu02g0: flash at 0 {
> > >  	};
> > >  };
> > >
> > > +&ftm_alarm1 {
> > > +	status = "okay";
> > > +};
> > > +
> > >  &i2c0 {
> > >  	status = "okay";
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > > index 7719f44bcaed..41900d351a92 100644
> > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > > @@ -21,7 +21,7 @@ aliases {
> > >  		serial1 = &duart1;
> > >  		mmc0 = &esdhc;
> > >  		mmc1 = &esdhc1;
> > > -		rtc1 = &ftm_alarm0;
> > > +		rtc1 = &ftm_alarm1;
> > >  	};
> > >
> > >  	chosen {
> > > @@ -132,6 +132,10 @@ mt35xu02g0: flash at 0 {
> > >  	};
> > >  };
> > >
> > > +&ftm_alarm1 {
> > > +	status = "okay";
> > > +};
> > > +
> > >  &i2c0 {
> > >  	status = "okay";
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > index 9efcaf68578c..ef9d17df2afa 100644
> > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > @@ -1198,6 +1198,15 @@ ftm_alarm0: timer at 2800000 {
> > >  			reg = <0x0 0x2800000 0x0 0x10000>;
> > >  			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000
> > 0x0 0x0>;
> > >  			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > > +			status = "disabled";
> > > +		};
> > > +
> > > +		ftm_alarm1: timer at 2810000 {
> > > +			compatible = "fsl,ls1028a-ftm-alarm";
> > > +			reg = <0x0 0x2810000 0x0 0x10000>;
> > > +			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000
> > 0x0 0x0>;
> > > +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> > > +			status = "disabled";
> > >  		};
> > >  	};
> > >
> > > --
> > > 2.25.1
> > >