[PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source

Leo Li leoyang.li at nxp.com
Mon Dec 13 22:16:34 PST 2021



> -----Original Message-----
> From: Shawn Guo <shawnguo at kernel.org>
> Sent: Tuesday, December 14, 2021 1:46 PM
> To: Leo Li <leoyang.li at nxp.com>
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> Biwen Li <biwen.li at nxp.com>
> Subject: Re: [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be
> used as wakeup source
> 
> On Fri, Dec 03, 2021 at 06:17:12PM -0600, Li Yang wrote:
> > From: Biwen Li <biwen.li at nxp.com>
> >
> > Add flextimer2 based ftm_alarm1 node and enable it to be the default
> > rtc wakeup source for rdb and qds boards instead of the original
> > flextimer1 based ftm_alarm0.  The ftm_alarm0 node hence is disabled by
> default.
> 
> What's wrong with using ftm_alarm0?

Not 100% sure, but probably because we need to use flextimer1 as PWM.

Biwen,  Can you comment?

> 
> Shawn
> 
> >
> > Signed-off-by: Biwen Li <biwen.li at nxp.com>
> > Signed-off-by: Li Yang <leoyang.li at nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++-
> > arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++-
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 9 +++++++++
> >  3 files changed, 19 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > index 6e2a1da662fb..00d5b81bdef3 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> > @@ -25,7 +25,7 @@ aliases {
> >  		serial1 = &duart1;
> >  		mmc0 = &esdhc;
> >  		mmc1 = &esdhc1;
> > -		rtc1 = &ftm_alarm0;
> > +		rtc1 = &ftm_alarm1;
> >  	};
> >
> >  	chosen {
> > @@ -234,6 +234,10 @@ mt35xu02g0: flash at 0 {
> >  	};
> >  };
> >
> > +&ftm_alarm1 {
> > +	status = "okay";
> > +};
> > +
> >  &i2c0 {
> >  	status = "okay";
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > index 7719f44bcaed..41900d351a92 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> > @@ -21,7 +21,7 @@ aliases {
> >  		serial1 = &duart1;
> >  		mmc0 = &esdhc;
> >  		mmc1 = &esdhc1;
> > -		rtc1 = &ftm_alarm0;
> > +		rtc1 = &ftm_alarm1;
> >  	};
> >
> >  	chosen {
> > @@ -132,6 +132,10 @@ mt35xu02g0: flash at 0 {
> >  	};
> >  };
> >
> > +&ftm_alarm1 {
> > +	status = "okay";
> > +};
> > +
> >  &i2c0 {
> >  	status = "okay";
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index 9efcaf68578c..ef9d17df2afa 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -1198,6 +1198,15 @@ ftm_alarm0: timer at 2800000 {
> >  			reg = <0x0 0x2800000 0x0 0x10000>;
> >  			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000
> 0x0 0x0>;
> >  			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +		};
> > +
> > +		ftm_alarm1: timer at 2810000 {
> > +			compatible = "fsl,ls1028a-ftm-alarm";
> > +			reg = <0x0 0x2810000 0x0 0x10000>;
> > +			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000
> 0x0 0x0>;
> > +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> >  		};
> >  	};
> >
> > --
> > 2.25.1
> >



More information about the linux-arm-kernel mailing list