[PATCH v2 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols
Li Yang
leoyang.li at nxp.com
Fri Dec 3 16:17:18 PST 2021
From: Alex Marginean <alexandru.marginean at nxp.com>
Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards. These should be applied at boot, based on serdes
configuration. If no overlay is applied, only the RGMII interface on
the QDS is available in Linux.
Building device tree fragments requires passing the "-@" argument to
dtc, which increases the base dtb size and might cause some platforms to
fail to store the new binary. To avoid that, it would be nice to only
pass "-@" for the platforms where fragments will be used, aka
LS1028A-QDS. One approach suggested by Rob Herring is used here:
https://lore.kernel.org/patchwork/patch/821645/
Also moved the enet* override nodes in dts file to be in alphabetic order.
Signed-off-by: Alex Marginean <alexandru.marginean at nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
Signed-off-by: Jason Liu <jason.hui.liu at nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 16 +++
.../dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 ++++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-7777.dts | 82 +++++++++++++
.../dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 +++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++++++++++++
.../dts/freescale/fsl-ls1028a-qds-9999.dts | 79 ++++++++++++
.../boot/dts/freescale/fsl-ls1028a-qds.dts | 19 ++-
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
9 files changed, 595 insertions(+), 6 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a14a6173b765..f518eb1e1142 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
+
+# required for overlay support
+DTC_FLAGS_fsl-ls1028a-qds := -@
+DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
+DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-899b := -@
+DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
+
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
@@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
new file mode 100644
index 000000000000..f748a2c12a70
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy at 2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment at 2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot2_qxgmii0: ethernet-phy at 0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii1: ethernet-phy at 1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii2: ethernet-phy at 2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii3: ethernet-phy at 3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment at 3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port at 0 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii0>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii1>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii2>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port at 3 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii3>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment at 4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
new file mode 100644
index 000000000000..8ffb707a1576
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy at 2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment at 2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy at 8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy at 9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy at a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy at b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment at 3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port at 0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment at 4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
new file mode 100644
index 000000000000..eb6a1e674f10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot1_sxgmii0: ethernet-phy at 0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii1: ethernet-phy at 1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii2: ethernet-phy at 2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii3: ethernet-phy at 3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port at 0 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii0>;
+ phy-mode = "2500base-x";
+ };
+
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii1>;
+ phy-mode = "2500base-x";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii2>;
+ phy-mode = "2500base-x";
+ };
+
+ port at 3 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii3>;
+ phy-mode = "2500base-x";
+ };
+ };
+ };
+
+ fragment at 2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
new file mode 100644
index 000000000000..8e90c3088ba1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy at 1c {
+ /* 1st port on VSC8234 */
+ reg = <0x1c>;
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment at 2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy at 8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy at 9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy at a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy at b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment at 3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port at 0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port at 3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment at 4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
new file mode 100644
index 000000000000..5d0a094e6c44
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy at 1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy at 1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy at 1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy at 1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&enetc_port0>;
+ __overlay__ {
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment at 2 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment at 3 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
new file mode 100644
index 000000000000..1ef743c48e84
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment at 0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy at 1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy at 1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy at 1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy at 1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment at 1 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port at 0 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port at 1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port at 2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port at 3 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii3>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment at 2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 782853a449cc..177bc1405f0f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -211,6 +211,16 @@ &duart1 {
status = "okay";
};
+&enetc_port1 {
+ phy-handle = <&qds_phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
@@ -326,17 +336,16 @@ rtc at 51 {
};
};
-&enetc_port1 {
- phy-handle = <&qds_phy1>;
- phy-mode = "rgmii-id";
+&lpuart0 {
status = "okay";
};
-&lpuart0 {
+&lpuart1 {
status = "okay";
};
-&lpuart1 {
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5c17dfaa50de..f305ac2906d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1115,7 +1115,7 @@ mscc_felix: ethernet-switch at 0,5 {
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- ports {
+ mscc_felix_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
More information about the linux-arm-kernel
mailing list