[PATCH v2 4/8] arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic

[Li Yang]

Keep these overrides node in alphabetic order in order to prevent
unnoticed duplicated nodes.

Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    | 88 ++++++++++---------
 1 file changed, 46 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 41900d351a92..7d87c90652d2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -102,6 +102,52 @@ can-transceiver {
 	};
 };
 
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy at 10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy at 11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy at 12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy at 13 {
+		reg = <0x13>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy at 2 {
+			reg = <0x2>;
+		};
+	};
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -192,48 +238,6 @@ rtc at 51 {
 	};
 };
 
-&duart0 {
-	status = "okay";
-};
-
-&duart1 {
-	status = "okay";
-};
-
-&enetc_mdio_pf3 {
-	sgmii_phy0: ethernet-phy at 2 {
-		reg = <0x2>;
-	};
-
-	/* VSC8514 QSGMII quad PHY */
-	qsgmii_phy0: ethernet-phy at 10 {
-		reg = <0x10>;
-	};
-
-	qsgmii_phy1: ethernet-phy at 11 {
-		reg = <0x11>;
-	};
-
-	qsgmii_phy2: ethernet-phy at 12 {
-		reg = <0x12>;
-	};
-
-	qsgmii_phy3: ethernet-phy at 13 {
-		reg = <0x13>;
-	};
-};
-
-&enetc_port0 {
-	phy-handle = <&sgmii_phy0>;
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	status = "okay";
-};
-
-&enetc_port2 {
-	status = "okay";
-};
-
 &mscc_felix {
 	status = "okay";
 };
-- 
2.25.1