[PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock

[Sam Protsenko]

In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a
part of USIv2 block, there are two clocks provided to HSI2C controller:
  - PCLK: bus clock (APB), provides access to register interface
  - IPCLK: operating IP-core clock; SCL is derived from this one

Both clocks have to be asserted for HSI2C to be functional in that case.

Modify bindings doc to allow specifying bus clock in addition to
already described operating clock. Make it optional though, as older
Exynos SoC variants only have one HSI2C clock.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
 .../devicetree/bindings/i2c/i2c-exynos5.yaml          | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
index db20e703dea0..a212c1d5e7d9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -49,11 +49,16 @@ properties:
       clock-frequency is >= 1MHz.
 
   clocks:
-    maxItems: 1
-    description: I2C operating clock
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
 
   clock-names:
-    const: hsi2c
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
 
 required:
   - compatible
-- 
2.30.2