[PATCH v2 6/8] dt-bindings: clock: samsung: convert Exynos AudSS to dtschema

Wed Aug 18 00:06:44 PDT 2021

On 17/08/2021 22:26, Rob Herring wrote:
> On Tue, Aug 10, 2021 at 11:31:43AM +0200, Krzysztof Kozlowski wrote:
>> Convert Samsung Exynos Audio SubSystem clock controller bindings to DT
>> schema format using json-schema.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
>> ---
>>  .../bindings/clock/clk-exynos-audss.txt       | 103 ------------------
>>  .../clock/samsung,exynos-audss-clock.yaml     |  79 ++++++++++++++
>>  2 files changed, 79 insertions(+), 103 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>> deleted file mode 100644
>> index 6030afb10b5c..000000000000
>> --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>> +++ /dev/null
>> @@ -1,103 +0,0 @@
>> -* Samsung Audio Subsystem Clock Controller
>> -
>> -The Samsung Audio Subsystem clock controller generates and supplies clocks
>> -to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
>> -binding described here is applicable to all SoCs in Exynos family.
>> -
>> -Required Properties:
>> -
>> -- compatible: should be one of the following:
>> -  - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
>> -  - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
>> -    SoCs.
>> -  - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
>> -    SoCs.
>> -  - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
>> -    SoCs.
>> -- reg: physical base address and length of the controller's register set.
>> -
>> -- #clock-cells: should be 1.
>> -
>> -- clocks:
>> -  - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
>> -    is used if not specified.
>> -  - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
>> -    is used if not specified.
>> -  - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
>> -    specified.
>> -  - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
>> -    not specified.
>> -  - sclk_pcm_in: PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not
>> -    specified.
>> -
>> -- clock-names: Aliases for the above clocks. They should be "pll_ref",
>> -  "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
>> -
>> -Optional Properties:
>> -
>> -  - power-domains: a phandle to respective power domain node as described by
>> -    generic PM domain bindings (see power/power_domain.txt for more
>> -    information).
>> -
>> -The following is the list of clocks generated by the controller. Each clock is
>> -assigned an identifier and client nodes use this identifier to specify the
>> -clock which they consume. Some of the clocks are available only on a particular
>> -Exynos4 SoC and this is specified where applicable.
>> -
>> -Provided clocks:
>> -
>> -Clock           ID      SoC (if specific)
>> ------------------------------------------------
>> -
>> -mout_audss      0
>> -mout_i2s        1
>> -dout_srp        2
>> -dout_aud_bus    3
>> -dout_i2s        4
>> -srp_clk         5
>> -i2s_bus         6
>> -sclk_i2s        7
>> -pcm_bus         8
>> -sclk_pcm        9
>> -adma            10      Exynos5420
>> -
>> -Example 1: An example of a clock controller node using the default input
>> -	   clock names is listed below.
>> -
>> -clock_audss: audss-clock-controller at 3810000 {
>> -	compatible = "samsung,exynos5250-audss-clock";
>> -	reg = <0x03810000 0x0C>;
>> -	#clock-cells = <1>;
>> -};
>> -
>> -Example 2: An example of a clock controller node with the input clocks
>> -           specified.
>> -
>> -clock_audss: audss-clock-controller at 3810000 {
>> -	compatible = "samsung,exynos5250-audss-clock";
>> -	reg = <0x03810000 0x0C>;
>> -	#clock-cells = <1>;
>> -	clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
>> -		<&ext_i2s_clk>;
>> -	clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
>> -};
>> -
>> -Example 3: I2S controller node that consumes the clock generated by the clock
>> -           controller. Refer to the standard clock bindings for information
>> -           about 'clocks' and 'clock-names' property.
>> -
>> -i2s0: i2s at 3830000 {
>> -	compatible = "samsung,i2s-v5";
>> -	reg = <0x03830000 0x100>;
>> -	dmas = <&pdma0 10
>> -		&pdma0 9
>> -		&pdma0 8>;
>> -	dma-names = "tx", "rx", "tx-sec";
>> -	clocks = <&clock_audss EXYNOS_I2S_BUS>,
>> -		<&clock_audss EXYNOS_I2S_BUS>,
>> -		<&clock_audss EXYNOS_SCLK_I2S>,
>> -		<&clock_audss EXYNOS_MOUT_AUDSS>,
>> -		<&clock_audss EXYNOS_MOUT_I2S>;
>> -	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
>> -		      "mout_audss", "mout_i2s";
>> -};
>> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
>> new file mode 100644
>> index 000000000000..d60b29fa22e7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
>> @@ -0,0 +1,79 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Samsung Exynos SoC Audio SubSystem clock controller
>> +
>> +maintainers:
>> +  - Chanwoo Choi <cw00.choi at samsung.com>
>> +  - Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
>> +  - Sylwester Nawrocki <s.nawrocki at samsung.com>
>> +  - Tomasz Figa <tomasz.figa at gmail.com>
>> +
>> +description: |
>> +  All available clocks are defined as preprocessor macros in
>> +  include/dt-bindings/clock/exynos-audss-clk.h header.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - samsung,exynos4210-audss-clock
>> +      - samsung,exynos5250-audss-clock
>> +      - samsung,exynos5410-audss-clock
>> +      - samsung,exynos5420-audss-clock
>> +
>> +  clocks:
>> +    minItems: 2
>> +    items:
>> +      - description:
>> +          Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
>> +          used if not specified.
>> +      - description:
>> +          Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
>> +          used if not specified.
>> +      - description:
>> +          Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
>> +          specified.
>> +      - description:
>> +          PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not specified.
>> +      - description:
>> +          External i2s clock, parent of mout_i2s. "cdclk0" is used if not
>> +          specified.
>> +
>> +  clock-names:
>> +    minItems: 2
>> +    items:
>> +      - const: pll_ref
>> +      - const: pll_in
>> +      - const: sclk_audio
>> +      - const: sclk_pcm_in
>> +      - const: cdclk
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +  power-domains: true
> 
> How many?
> 

I'll fix it, thanks for review.

Best regards,
Krzysztof