[PATCH v2 6/8] dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
Rob Herring
robh at kernel.org
Tue Aug 17 13:26:10 PDT 2021
On Tue, Aug 10, 2021 at 11:31:43AM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Audio SubSystem clock controller bindings to DT
> schema format using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> ---
> .../bindings/clock/clk-exynos-audss.txt | 103 ------------------
> .../clock/samsung,exynos-audss-clock.yaml | 79 ++++++++++++++
> 2 files changed, 79 insertions(+), 103 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
> create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
> deleted file mode 100644
> index 6030afb10b5c..000000000000
> --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -* Samsung Audio Subsystem Clock Controller
> -
> -The Samsung Audio Subsystem clock controller generates and supplies clocks
> -to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
> -binding described here is applicable to all SoCs in Exynos family.
> -
> -Required Properties:
> -
> -- compatible: should be one of the following:
> - - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
> - - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
> - SoCs.
> - - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
> - SoCs.
> - - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
> - SoCs.
> -- reg: physical base address and length of the controller's register set.
> -
> -- #clock-cells: should be 1.
> -
> -- clocks:
> - - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
> - is used if not specified.
> - - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
> - is used if not specified.
> - - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
> - specified.
> - - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
> - not specified.
> - - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not
> - specified.
> -
> -- clock-names: Aliases for the above clocks. They should be "pll_ref",
> - "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
> -
> -Optional Properties:
> -
> - - power-domains: a phandle to respective power domain node as described by
> - generic PM domain bindings (see power/power_domain.txt for more
> - information).
> -
> -The following is the list of clocks generated by the controller. Each clock is
> -assigned an identifier and client nodes use this identifier to specify the
> -clock which they consume. Some of the clocks are available only on a particular
> -Exynos4 SoC and this is specified where applicable.
> -
> -Provided clocks:
> -
> -Clock ID SoC (if specific)
> ------------------------------------------------
> -
> -mout_audss 0
> -mout_i2s 1
> -dout_srp 2
> -dout_aud_bus 3
> -dout_i2s 4
> -srp_clk 5
> -i2s_bus 6
> -sclk_i2s 7
> -pcm_bus 8
> -sclk_pcm 9
> -adma 10 Exynos5420
> -
> -Example 1: An example of a clock controller node using the default input
> - clock names is listed below.
> -
> -clock_audss: audss-clock-controller at 3810000 {
> - compatible = "samsung,exynos5250-audss-clock";
> - reg = <0x03810000 0x0C>;
> - #clock-cells = <1>;
> -};
> -
> -Example 2: An example of a clock controller node with the input clocks
> - specified.
> -
> -clock_audss: audss-clock-controller at 3810000 {
> - compatible = "samsung,exynos5250-audss-clock";
> - reg = <0x03810000 0x0C>;
> - #clock-cells = <1>;
> - clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
> - <&ext_i2s_clk>;
> - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
> -};
> -
> -Example 3: I2S controller node that consumes the clock generated by the clock
> - controller. Refer to the standard clock bindings for information
> - about 'clocks' and 'clock-names' property.
> -
> -i2s0: i2s at 3830000 {
> - compatible = "samsung,i2s-v5";
> - reg = <0x03830000 0x100>;
> - dmas = <&pdma0 10
> - &pdma0 9
> - &pdma0 8>;
> - dma-names = "tx", "rx", "tx-sec";
> - clocks = <&clock_audss EXYNOS_I2S_BUS>,
> - <&clock_audss EXYNOS_I2S_BUS>,
> - <&clock_audss EXYNOS_SCLK_I2S>,
> - <&clock_audss EXYNOS_MOUT_AUDSS>,
> - <&clock_audss EXYNOS_MOUT_I2S>;
> - clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
> - "mout_audss", "mout_i2s";
> -};
> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
> new file mode 100644
> index 000000000000..d60b29fa22e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC Audio SubSystem clock controller
> +
> +maintainers:
> + - Chanwoo Choi <cw00.choi at samsung.com>
> + - Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> + - Sylwester Nawrocki <s.nawrocki at samsung.com>
> + - Tomasz Figa <tomasz.figa at gmail.com>
> +
> +description: |
> + All available clocks are defined as preprocessor macros in
> + include/dt-bindings/clock/exynos-audss-clk.h header.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos4210-audss-clock
> + - samsung,exynos5250-audss-clock
> + - samsung,exynos5410-audss-clock
> + - samsung,exynos5420-audss-clock
> +
> + clocks:
> + minItems: 2
> + items:
> + - description:
> + Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
> + used if not specified.
> + - description:
> + Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
> + used if not specified.
> + - description:
> + Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
> + specified.
> + - description:
> + PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not specified.
> + - description:
> + External i2s clock, parent of mout_i2s. "cdclk0" is used if not
> + specified.
> +
> + clock-names:
> + minItems: 2
> + items:
> + - const: pll_ref
> + - const: pll_in
> + - const: sclk_audio
> + - const: sclk_pcm_in
> + - const: cdclk
> +
> + "#clock-cells":
> + const: 1
> +
> + power-domains: true
How many?
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - "#clock-cells"
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + clock-controller at 3810000 {
> + compatible = "samsung,exynos5250-audss-clock";
> + reg = <0x03810000 0x0c>;
> + #clock-cells = <1>;
> + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>;
> + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
> + };
> --
> 2.30.2
>
>
More information about the linux-arm-kernel
mailing list