[PATCH 10/17] clk: sunxi=ng: add support for R329 R-CCU
Icenowy Zheng
icenowy at sipeed.com
Mon Aug 2 02:03:32 PDT 2021
在 2021-08-02星期一的 14:22 +0800，Icenowy Zheng写道：
> Allwinner R329 has clock controls in PRCM, like other new Allwinner
> SoCs.
>
> Add support for them.
>
> This driver is added before the main CCU because PLLs are controlled
> by
> R-CCU on R329.
Well, I forgot to mention that the R_DMA bus clock gates/resets are not
documented on the user manual, and the info here is get by experiment.
There seems to be another hidden bus clock gate/reset according to a
register dump of R_CCU done on BSP kernel, but I have no idea what it
is.
>
> Signed-off-by: Icenowy Zheng <icenowy at sipeed.com>
> ---
> drivers/clk/sunxi-ng/Kconfig | 5 +
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c | 374
> ++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h | 33 ++
> include/dt-bindings/clock/sun50i-r329-r-ccu.h | 33 ++
> include/dt-bindings/reset/sun50i-r329-r-ccu.h | 24 ++
> 6 files changed, 470 insertions(+)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
> create mode 100644 include/dt-bindings/clock/sun50i-r329-r-ccu.h
> create mode 100644 include/dt-bindings/reset/sun50i-r329-r-ccu.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-
> ng/Kconfig
> index cd46d8853876..e49b2c2fa5b7 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -42,6 +42,11 @@ config SUN50I_H6_R_CCU
> default ARM64 && ARCH_SUNXI
> depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>
> +config SUN50I_R329_R_CCU
> + bool "Support for the Allwinner R329 PRCM CCU"
> + default ARM64 && ARCH_SUNXI
> + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
> +
> config SUN4I_A10_CCU
> bool "Support for the Allwinner A10/A20 CCU"
> default MACH_SUN4I
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-
> ng/Makefile
> index 96c324306d97..db338a2188fd 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-
> sun50i-a100-r.o
> obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
> obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o
> obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
> +obj-$(CONFIG_SUN50I_R329_R_CCU) += ccu-sun50i-r329-r.o
> obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
> obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
> obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
> b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
> new file mode 100644
> index 000000000000..5413a701cb57
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
> @@ -0,0 +1,374 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 Sipeed
> + * Based on the H616 CCU driver, which is:
> + * Copyright (c) 2020 Arm Ltd.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +
> +#include "ccu-sun50i-r329-r.h"
> +
> +/*
> + * The M factor is present in the register's description, but not in
> the
> + * frequency formula, and it's documented as "The bit is only for
> + * testing", so it's not modelled and then force to 0.
> + */
> +#define SUN50I_R329_PLL_CPUX_REG 0x1000
> +static struct ccu_mult pll_cpux_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .common = {
> + .reg = 0x1000,
> + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
> + &ccu_mult_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_R329_PLL_PERIPH_REG 0x1010
> +static struct ccu_nm pll_periph_base_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .common = {
> + .reg = 0x1010,
> + .hw.init = CLK_HW_INIT("pll-periph-base",
> "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +static SUNXI_CCU_M(pll_periph_2x_clk, "pll-periph-2x", "pll-periph-
> base",
> + 0x1010, 16, 3, 0);
> +static SUNXI_CCU_M(pll_periph_800m_clk, "pll-periph-800m", "pll-
> periph-base",
> + 0x1010, 20, 3, 0);
> +static CLK_FIXED_FACTOR_HW(pll_periph_clk, "pll-periph",
> + &pll_periph_2x_clk.common.hw, 2, 1, 0);
> +
> +#define SUN50I_R329_PLL_AUDIO0_REG 0x1020
> +static struct ccu_sdm_setting pll_audio0_sdm_table[] = {
> + { .rate = 1548288000, .pattern = 0xc0070624, .m = 1, .n = 64
> },
> +};
> +
> +static struct ccu_nm pll_audio0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1),
> + .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table,
> + BIT(24), 0x1120, BIT(31)),
> + .common = {
> + .features = CCU_FEATURE_SIGMA_DELTA_MOD,
> + .reg = 0x1020,
> + .hw.init = CLK_HW_INIT("pll-audio0", "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +static SUNXI_CCU_M(pll_audio0_div2_clk, "pll-audio0-div2", "pll-
> audio0",
> + 0x1020, 16, 3, 0);
> +static SUNXI_CCU_M(pll_audio0_div5_clk, "pll-audio0-div5", "pll-
> audio0",
> + 0x1020, 20, 3, 0);
> +
> +/*
> + * PLL-AUDIO1 has 3 dividers defined in the datasheet, however the
> + * BSP driver always has M0 = 1 and M1 = 2 (this is also the
> + * reset value in the register).
> + *
> + * Here just module it as NM clock, and force M0 = 1 and M1 = 2.
> + */
> +#define SUN50I_R329_PLL_AUDIO1_REG 0x1030
> +static struct ccu_sdm_setting pll_audio1_4x_sdm_table[] = {
> + { .rate = 22579200, .pattern = 0xc001288d, .m = 12, .n = 22
> },
> + { .rate = 24576000, .pattern = 0xc00126e9, .m = 12, .n = 24
> },
> + { .rate = 90316800, .pattern = 0xc001288d, .m = 3, .n = 22 },
> + { .rate = 98304000, .pattern = 0xc00126e9, .m = 3, .n = 24 },
> +};
> +static struct ccu_nm pll_audio1_4x_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(16, 6),
> + .fixed_post_div = 2,
> + .sdm = _SUNXI_CCU_SDM(pll_audio1_4x_sdm_table,
> + BIT(24), 0x1130, BIT(31)),
> + .common = {
> + .features = CCU_FEATURE_FIXED_POSTDIV |
> + CCU_FEATURE_SIGMA_DELTA_MOD,
> + .reg = 0x1030,
> + .hw.init = CLK_HW_INIT("pll-audio1-4x",
> "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +static CLK_FIXED_FACTOR_HW(pll_audio1_2x_clk, "pll-audio1-2x",
> + &pll_audio1_4x_clk.common.hw, 2, 1,
> + CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HW(pll_audio1_clk, "pll-audio1",
> + &pll_audio1_4x_clk.common.hw, 4, 1,
> + CLK_SET_RATE_PARENT);
> +
> +static const char * const r_bus_parents[] = { "osc24M", "osc32k",
> "iosc",
> + "pll-periph-2x",
> + "pll-audio0-div2" };
> +static SUNXI_CCU_MP_WITH_MUX(r_ahb_clk, "r-ahb", r_bus_parents,
> 0x000,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(r_apb1_clk, "r-apb1", r_bus_parents,
> 0x00c,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(r_apb2_clk, "r-apb2", r_bus_parents,
> 0x010,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static SUNXI_CCU_GATE(r_bus_gpadc_clk, "r-bus-gpadc", "r-apb1",
> + 0x0ec, BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_ths_clk, "r-bus-ths", "r-apb1", 0x0fc,
> BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(r_bus_dma_clk, "r-bus-dma", "r-apb1", 0x10c,
> BIT(0), 0);
> +
> +static const char * const r_pwm_parents[] = { "osc24M", "osc32k",
> "iosc" };
> +static SUNXI_CCU_MUX_WITH_GATE(r_pwm_clk, "r-pwm", r_pwm_parents,
> 0x130,
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(r_bus_pwm_clk, "r-bus-pwm", "r-apb1", 0x13c,
> BIT(0), 0);
> +
> +static const char * const r_audio_parents[] = { "pll-audio0-div5",
> "pll-audio0-div2",
> + "pll-audio1-1x",
> "pll-audio1-4x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_codec_adc_clk, "r-codec-adc",
> r_audio_parents, 0x140,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_codec_dac_clk, "r-codec-dac",
> r_audio_parents, 0x144,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(r_bus_codec_clk, "r-bus-codec", "r-apb1",
> + 0x14c, BIT(0), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_dmic_clk, "r-dmic",
> r_audio_parents, 0x150,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(r_bus_dmic_clk, "r-bus-dmic", "r-apb1", 0x15c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_lradc_clk, "r-bus-lradc", "r-apb1",
> + 0x16c, BIT(0), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_i2s_clk, "r-i2s",
> r_audio_parents, 0x170,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_i2s_asrc_clk, "r-i2s-asrc",
> + r_audio_parents, 0x174,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +static SUNXI_CCU_GATE(r_bus_i2s_clk, "r-bus-i2s", "r-apb1", 0x17c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_uart_clk, "r-bus-uart", "r-apb2", 0x18c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_i2c_clk, "r-bus-i2c", "r-apb2", 0x19c,
> BIT(0), 0);
> +
> +static const char * const r_ir_parents[] = { "osc32k", "osc24M" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(r_ir_clk, "r-ir", r_ir_parents,
> 0x1c0,
> + 0, 5, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(r_bus_ir_clk, "r-bus-ir", "r-apb1", 0x1cc,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_msgbox_clk, "r-bus-msgbox", "r-apb1",
> + 0x1dc, BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_spinlock_clk, "r-bus-spinlock", "r-
> apb1",
> + 0x1ec, BIT(0), 0);
> +static SUNXI_CCU_GATE(r_bus_rtc_clk, "r-bus-rtc", "r-ahb",
> + 0x20c, BIT(0), CLK_IS_CRITICAL);
> +
> +static struct ccu_common *sun50i_r329_r_ccu_clks[] = {
> + &pll_cpux_clk.common,
> + &pll_periph_base_clk.common,
> + &pll_periph_2x_clk.common,
> + &pll_periph_800m_clk.common,
> + &pll_audio0_clk.common,
> + &pll_audio0_div2_clk.common,
> + &pll_audio0_div5_clk.common,
> + &pll_audio1_4x_clk.common,
> + &r_ahb_clk.common,
> + &r_apb1_clk.common,
> + &r_apb2_clk.common,
> + &r_bus_gpadc_clk.common,
> + &r_bus_ths_clk.common,
> + &r_bus_dma_clk.common,
> + &r_pwm_clk.common,
> + &r_bus_pwm_clk.common,
> + &r_codec_adc_clk.common,
> + &r_codec_dac_clk.common,
> + &r_bus_codec_clk.common,
> + &r_dmic_clk.common,
> + &r_bus_dmic_clk.common,
> + &r_bus_lradc_clk.common,
> + &r_i2s_clk.common,
> + &r_i2s_asrc_clk.common,
> + &r_bus_i2s_clk.common,
> + &r_bus_uart_clk.common,
> + &r_bus_i2c_clk.common,
> + &r_ir_clk.common,
> + &r_bus_ir_clk.common,
> + &r_bus_msgbox_clk.common,
> + &r_bus_spinlock_clk.common,
> + &r_bus_rtc_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sun50i_r329_r_hw_clks = {
> + .hws = {
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> + [CLK_PLL_PERIPH_BASE] =
> &pll_periph_base_clk.common.hw,
> + [CLK_PLL_PERIPH_2X] =
> &pll_periph_2x_clk.common.hw,
> + [CLK_PLL_PERIPH_800M] =
> &pll_periph_800m_clk.common.hw,
> + [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
> + [CLK_PLL_AUDIO0] = &pll_audio0_clk.common.hw,
> + [CLK_PLL_AUDIO0_DIV2] =
> &pll_audio0_div2_clk.common.hw,
> + [CLK_PLL_AUDIO0_DIV5] =
> &pll_audio0_div5_clk.common.hw,
> + [CLK_PLL_AUDIO1_4X] =
> &pll_audio1_4x_clk.common.hw,
> + [CLK_PLL_AUDIO1_2X] = &pll_audio1_2x_clk.hw,
> + [CLK_PLL_AUDIO1] = &pll_audio1_clk.hw,
> + [CLK_R_AHB] = &r_ahb_clk.common.hw,
> + [CLK_R_APB1] = &r_apb1_clk.common.hw,
> + [CLK_R_APB2] = &r_apb2_clk.common.hw,
> + [CLK_R_BUS_GPADC] = &r_bus_gpadc_clk.common.hw,
> + [CLK_R_BUS_THS] = &r_bus_ths_clk.common.hw,
> + [CLK_R_BUS_DMA] = &r_bus_dma_clk.common.hw,
> + [CLK_R_PWM] = &r_pwm_clk.common.hw,
> + [CLK_R_BUS_PWM] = &r_bus_pwm_clk.common.hw,
> + [CLK_R_CODEC_ADC] = &r_codec_adc_clk.common.hw,
> + [CLK_R_CODEC_DAC] = &r_codec_dac_clk.common.hw,
> + [CLK_R_BUS_CODEC] = &r_bus_codec_clk.common.hw,
> + [CLK_R_DMIC] = &r_dmic_clk.common.hw,
> + [CLK_R_BUS_DMIC] = &r_bus_dmic_clk.common.hw,
> + [CLK_R_BUS_LRADC] = &r_bus_lradc_clk.common.hw,
> + [CLK_R_I2S] = &r_i2s_clk.common.hw,
> + [CLK_R_I2S_ASRC] = &r_i2s_asrc_clk.common.hw,
> + [CLK_R_BUS_I2S] = &r_bus_i2s_clk.common.hw,
> + [CLK_R_BUS_UART] = &r_bus_uart_clk.common.hw,
> + [CLK_R_BUS_I2C] = &r_bus_i2c_clk.common.hw,
> + [CLK_R_IR] = &r_ir_clk.common.hw,
> + [CLK_R_BUS_IR] = &r_bus_ir_clk.common.hw,
> + [CLK_R_BUS_MSGBOX] =
> &r_bus_msgbox_clk.common.hw,
> + [CLK_R_BUS_SPINLOCK] =
> &r_bus_spinlock_clk.common.hw,
> + [CLK_R_BUS_RTC] = &r_bus_rtc_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun50i_r329_r_ccu_resets[] = {
> + [RST_R_BUS_GPADC] = { 0x0ec, BIT(16) },
> + [RST_R_BUS_THS] = { 0x0fc, BIT(16) },
> + [RST_R_BUS_DMA] = { 0x10c, BIT(16) },
> + [RST_R_BUS_PWM] = { 0x13c, BIT(16) },
> + [RST_R_BUS_CODEC] = { 0x14c, BIT(16) },
> + [RST_R_BUS_DMIC] = { 0x15c, BIT(16) },
> + [RST_R_BUS_LRADC] = { 0x16c, BIT(16) },
> + [RST_R_BUS_I2S] = { 0x17c, BIT(16) },
> + [RST_R_BUS_UART] = { 0x18c, BIT(16) },
> + [RST_R_BUS_I2C] = { 0x19c, BIT(16) },
> + [RST_R_BUS_IR] = { 0x1cc, BIT(16) },
> + [RST_R_BUS_MSGBOX] = { 0x1dc, BIT(16) },
> + [RST_R_BUS_SPINLOCK] = { 0x1ec, BIT(16) },
> + [RST_R_BUS_RTC] = { 0x20c, BIT(16) },
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_r329_r_ccu_desc = {
> + .ccu_clks = sun50i_r329_r_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sun50i_r329_r_ccu_clks),
> +
> + .hw_clks = &sun50i_r329_r_hw_clks,
> +
> + .resets = sun50i_r329_r_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun50i_r329_r_ccu_resets),
> +};
> +
> +static const u32 pll_regs[] = {
> + SUN50I_R329_PLL_CPUX_REG,
> + SUN50I_R329_PLL_PERIPH_REG,
> + SUN50I_R329_PLL_AUDIO0_REG,
> + SUN50I_R329_PLL_AUDIO1_REG,
> +};
> +
> +static void __init sun50i_r329_r_ccu_setup(struct device_node *node)
> +{
> + void __iomem *reg;
> + u32 val;
> + int i;
> +
> + reg = of_io_request_and_map(node, 0,
> of_node_full_name(node));
> + if (IS_ERR(reg)) {
> + pr_err("%pOF: Could not map clock registers\n",
> node);
> + return;
> + }
> +
> + /* Enable the lock bits and the output enable bits on all
> PLLs */
> + for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
> + val = readl(reg + pll_regs[i]);
> + val |= BIT(29) | BIT(27);
> + writel(val, reg + pll_regs[i]);
> + }
> +
> + /*
> + * Force the I/O dividers of PLL-AUDIO1 to reset default
> value
> + *
> + * See the comment before pll-audio1 definition for the
> reason.
> + */
> +
> + val = readl(reg + SUN50I_R329_PLL_AUDIO1_REG);
> + val &= ~BIT(1);
> + val |= BIT(0);
> + writel(val, reg + SUN50I_R329_PLL_AUDIO1_REG);
> +
> + i = sunxi_ccu_probe(node, reg, &sun50i_r329_r_ccu_desc);
> + if (i)
> + pr_err("%pOF: probing clocks fails: %d\n", node, i);
> +}
> +
> +CLK_OF_DECLARE(sun50i_r329_r_ccu, "allwinner,sun50i-r329-r-ccu",
> + sun50i_r329_r_ccu_setup);
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
> b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
> new file mode 100644
> index 000000000000..62cf65322116
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Sipeed
> + */
> +
> +#ifndef _CCU_SUN50I_R329_R_H
> +#define _CCU_SUN50I_R329_R_H
> +
> +#include <dt-bindings/clock/sun50i-r329-r-ccu.h>
> +#include <dt-bindings/reset/sun50i-r329-r-ccu.h>
> +
> +#define CLK_PLL_CPUX 0
> +#define CLK_PLL_PERIPH_BASE 1
> +#define CLK_PLL_PERIPH_2X 2
> +#define CLK_PLL_PERIPH_800M 3
> +#define CLK_PLL_PERIPH 4
> +#define CLK_PLL_AUDIO0 5
> +#define CLK_PLL_AUDIO0_DIV2 6
> +#define CLK_PLL_AUDIO0_DIV5 7
> +#define CLK_PLL_AUDIO1_4X 8
> +#define CLK_PLL_AUDIO1_2X 9
> +#define CLK_PLL_AUDIO1 10
> +#define CLK_R_AHB 11
> +
> +/* R_APB1 exported for PIO */
> +
> +#define CLK_R_APB2 13
> +
> +/* All module / bus gate clocks exported */
> +
> +#define CLK_NUMBER (CLK_R_BUS_RTC + 1)
> +
> +#endif /* _CCU_SUN50I_R329_R_H */
> diff --git a/include/dt-bindings/clock/sun50i-r329-r-ccu.h
> b/include/dt-bindings/clock/sun50i-r329-r-ccu.h
> new file mode 100644
> index 000000000000..df9bc58de5c4
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun50i-r329-r-ccu.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Sipeed
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_
> +#define _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_
> +
> +#define CLK_R_APB1 12
> +
> +#define CLK_R_BUS_GPADC 14
> +#define CLK_R_BUS_THS 15
> +#define CLK_R_BUS_DMA 16
> +#define CLK_R_PWM 17
> +#define CLK_R_BUS_PWM 18
> +#define CLK_R_CODEC_ADC 19
> +#define CLK_R_CODEC_DAC 20
> +#define CLK_R_BUS_CODEC 21
> +#define CLK_R_DMIC 22
> +#define CLK_R_BUS_DMIC 23
> +#define CLK_R_BUS_LRADC 24
> +#define CLK_R_I2S 25
> +#define CLK_R_I2S_ASRC 26
> +#define CLK_R_BUS_I2S 27
> +#define CLK_R_BUS_UART 28
> +#define CLK_R_BUS_I2C 29
> +#define CLK_R_IR 30
> +#define CLK_R_BUS_IR 31
> +#define CLK_R_BUS_MSGBOX 32
> +#define CLK_R_BUS_SPINLOCK 33
> +#define CLK_R_BUS_RTC 34
> +
> +#endif /* _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_ */
> diff --git a/include/dt-bindings/reset/sun50i-r329-r-ccu.h
> b/include/dt-bindings/reset/sun50i-r329-r-ccu.h
> new file mode 100644
> index 000000000000..40644f2f21c6
> --- /dev/null
> +++ b/include/dt-bindings/reset/sun50i-r329-r-ccu.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
> +/*
> + * Copyright (c) 2021 Sipeed
> + */
> +
> +#ifndef _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_
> +#define _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_
> +
> +#define RST_R_BUS_GPADC 0
> +#define RST_R_BUS_THS 1
> +#define RST_R_BUS_DMA 2
> +#define RST_R_BUS_PWM 3
> +#define RST_R_BUS_CODEC 4
> +#define RST_R_BUS_DMIC 5
> +#define RST_R_BUS_LRADC 6
> +#define RST_R_BUS_I2S 7
> +#define RST_R_BUS_UART 8
> +#define RST_R_BUS_I2C 9
> +#define RST_R_BUS_IR 10
> +#define RST_R_BUS_MSGBOX 11
> +#define RST_R_BUS_SPINLOCK 12
> +#define RST_R_BUS_RTC 13
> +
> +#endif /* _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_ */
More information about the linux-arm-kernel
mailing list