[PATCH 10/17] clk: sunxi=ng: add support for R329 R-CCU
Icenowy Zheng
icenowy at sipeed.com
Sun Aug 1 23:22:05 PDT 2021
Allwinner R329 has clock controls in PRCM, like other new Allwinner
SoCs.
Add support for them.
This driver is added before the main CCU because PLLs are controlled by
R-CCU on R329.
Signed-off-by: Icenowy Zheng <icenowy at sipeed.com>
---
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c | 374 ++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h | 33 ++
include/dt-bindings/clock/sun50i-r329-r-ccu.h | 33 ++
include/dt-bindings/reset/sun50i-r329-r-ccu.h | 24 ++
6 files changed, 470 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
create mode 100644 include/dt-bindings/clock/sun50i-r329-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-r329-r-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index cd46d8853876..e49b2c2fa5b7 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -42,6 +42,11 @@ config SUN50I_H6_R_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUN50I_R329_R_CCU
+ bool "Support for the Allwinner R329 PRCM CCU"
+ default ARM64 && ARCH_SUNXI
+ depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
config SUN4I_A10_CCU
bool "Support for the Allwinner A10/A20 CCU"
default MACH_SUN4I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 96c324306d97..db338a2188fd 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o
obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o
obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
+obj-$(CONFIG_SUN50I_R329_R_CCU) += ccu-sun50i-r329-r.o
obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
new file mode 100644
index 000000000000..5413a701cb57
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Sipeed
+ * Based on the H616 CCU driver, which is:
+ * Copyright (c) 2020 Arm Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-r329-r.h"
+
+/*
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "The bit is only for
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_R329_PLL_CPUX_REG 0x1000
+static struct ccu_mult pll_cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .common = {
+ .reg = 0x1000,
+ .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
+ &ccu_mult_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_R329_PLL_PERIPH_REG 0x1010
+static struct ccu_nm pll_periph_base_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = 0x1010,
+ .hw.init = CLK_HW_INIT("pll-periph-base", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static SUNXI_CCU_M(pll_periph_2x_clk, "pll-periph-2x", "pll-periph-base",
+ 0x1010, 16, 3, 0);
+static SUNXI_CCU_M(pll_periph_800m_clk, "pll-periph-800m", "pll-periph-base",
+ 0x1010, 20, 3, 0);
+static CLK_FIXED_FACTOR_HW(pll_periph_clk, "pll-periph",
+ &pll_periph_2x_clk.common.hw, 2, 1, 0);
+
+#define SUN50I_R329_PLL_AUDIO0_REG 0x1020
+static struct ccu_sdm_setting pll_audio0_sdm_table[] = {
+ { .rate = 1548288000, .pattern = 0xc0070624, .m = 1, .n = 64 },
+};
+
+static struct ccu_nm pll_audio0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1),
+ .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table,
+ BIT(24), 0x1120, BIT(31)),
+ .common = {
+ .features = CCU_FEATURE_SIGMA_DELTA_MOD,
+ .reg = 0x1020,
+ .hw.init = CLK_HW_INIT("pll-audio0", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static SUNXI_CCU_M(pll_audio0_div2_clk, "pll-audio0-div2", "pll-audio0",
+ 0x1020, 16, 3, 0);
+static SUNXI_CCU_M(pll_audio0_div5_clk, "pll-audio0-div5", "pll-audio0",
+ 0x1020, 20, 3, 0);
+
+/*
+ * PLL-AUDIO1 has 3 dividers defined in the datasheet, however the
+ * BSP driver always has M0 = 1 and M1 = 2 (this is also the
+ * reset value in the register).
+ *
+ * Here just module it as NM clock, and force M0 = 1 and M1 = 2.
+ */
+#define SUN50I_R329_PLL_AUDIO1_REG 0x1030
+static struct ccu_sdm_setting pll_audio1_4x_sdm_table[] = {
+ { .rate = 22579200, .pattern = 0xc001288d, .m = 12, .n = 22 },
+ { .rate = 24576000, .pattern = 0xc00126e9, .m = 12, .n = 24 },
+ { .rate = 90316800, .pattern = 0xc001288d, .m = 3, .n = 22 },
+ { .rate = 98304000, .pattern = 0xc00126e9, .m = 3, .n = 24 },
+};
+static struct ccu_nm pll_audio1_4x_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(16, 6),
+ .fixed_post_div = 2,
+ .sdm = _SUNXI_CCU_SDM(pll_audio1_4x_sdm_table,
+ BIT(24), 0x1130, BIT(31)),
+ .common = {
+ .features = CCU_FEATURE_FIXED_POSTDIV |
+ CCU_FEATURE_SIGMA_DELTA_MOD,
+ .reg = 0x1030,
+ .hw.init = CLK_HW_INIT("pll-audio1-4x", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static CLK_FIXED_FACTOR_HW(pll_audio1_2x_clk, "pll-audio1-2x",
+ &pll_audio1_4x_clk.common.hw, 2, 1,
+ CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_audio1_clk, "pll-audio1",
+ &pll_audio1_4x_clk.common.hw, 4, 1,
+ CLK_SET_RATE_PARENT);
+
+static const char * const r_bus_parents[] = { "osc24M", "osc32k", "iosc",
+ "pll-periph-2x",
+ "pll-audio0-div2" };
+static SUNXI_CCU_MP_WITH_MUX(r_ahb_clk, "r-ahb", r_bus_parents, 0x000,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(r_apb1_clk, "r-apb1", r_bus_parents, 0x00c,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(r_apb2_clk, "r-apb2", r_bus_parents, 0x010,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(r_bus_gpadc_clk, "r-bus-gpadc", "r-apb1",
+ 0x0ec, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_ths_clk, "r-bus-ths", "r-apb1", 0x0fc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(r_bus_dma_clk, "r-bus-dma", "r-apb1", 0x10c, BIT(0), 0);
+
+static const char * const r_pwm_parents[] = { "osc24M", "osc32k", "iosc" };
+static SUNXI_CCU_MUX_WITH_GATE(r_pwm_clk, "r-pwm", r_pwm_parents, 0x130,
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(r_bus_pwm_clk, "r-bus-pwm", "r-apb1", 0x13c, BIT(0), 0);
+
+static const char * const r_audio_parents[] = { "pll-audio0-div5", "pll-audio0-div2",
+ "pll-audio1-1x", "pll-audio1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_codec_adc_clk, "r-codec-adc", r_audio_parents, 0x140,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_codec_dac_clk, "r-codec-dac", r_audio_parents, 0x144,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(r_bus_codec_clk, "r-bus-codec", "r-apb1",
+ 0x14c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_dmic_clk, "r-dmic", r_audio_parents, 0x150,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(r_bus_dmic_clk, "r-bus-dmic", "r-apb1", 0x15c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_lradc_clk, "r-bus-lradc", "r-apb1",
+ 0x16c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_i2s_clk, "r-i2s", r_audio_parents, 0x170,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_i2s_asrc_clk, "r-i2s-asrc",
+ r_audio_parents, 0x174,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_GATE(r_bus_i2s_clk, "r-bus-i2s", "r-apb1", 0x17c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_uart_clk, "r-bus-uart", "r-apb2", 0x18c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_i2c_clk, "r-bus-i2c", "r-apb2", 0x19c, BIT(0), 0);
+
+static const char * const r_ir_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_ir_clk, "r-ir", r_ir_parents, 0x1c0,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(r_bus_ir_clk, "r-bus-ir", "r-apb1", 0x1cc, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_msgbox_clk, "r-bus-msgbox", "r-apb1",
+ 0x1dc, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_spinlock_clk, "r-bus-spinlock", "r-apb1",
+ 0x1ec, BIT(0), 0);
+static SUNXI_CCU_GATE(r_bus_rtc_clk, "r-bus-rtc", "r-ahb",
+ 0x20c, BIT(0), CLK_IS_CRITICAL);
+
+static struct ccu_common *sun50i_r329_r_ccu_clks[] = {
+ &pll_cpux_clk.common,
+ &pll_periph_base_clk.common,
+ &pll_periph_2x_clk.common,
+ &pll_periph_800m_clk.common,
+ &pll_audio0_clk.common,
+ &pll_audio0_div2_clk.common,
+ &pll_audio0_div5_clk.common,
+ &pll_audio1_4x_clk.common,
+ &r_ahb_clk.common,
+ &r_apb1_clk.common,
+ &r_apb2_clk.common,
+ &r_bus_gpadc_clk.common,
+ &r_bus_ths_clk.common,
+ &r_bus_dma_clk.common,
+ &r_pwm_clk.common,
+ &r_bus_pwm_clk.common,
+ &r_codec_adc_clk.common,
+ &r_codec_dac_clk.common,
+ &r_bus_codec_clk.common,
+ &r_dmic_clk.common,
+ &r_bus_dmic_clk.common,
+ &r_bus_lradc_clk.common,
+ &r_i2s_clk.common,
+ &r_i2s_asrc_clk.common,
+ &r_bus_i2s_clk.common,
+ &r_bus_uart_clk.common,
+ &r_bus_i2c_clk.common,
+ &r_ir_clk.common,
+ &r_bus_ir_clk.common,
+ &r_bus_msgbox_clk.common,
+ &r_bus_spinlock_clk.common,
+ &r_bus_rtc_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_r329_r_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH_2X] = &pll_periph_2x_clk.common.hw,
+ [CLK_PLL_PERIPH_800M] = &pll_periph_800m_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_AUDIO0] = &pll_audio0_clk.common.hw,
+ [CLK_PLL_AUDIO0_DIV2] = &pll_audio0_div2_clk.common.hw,
+ [CLK_PLL_AUDIO0_DIV5] = &pll_audio0_div5_clk.common.hw,
+ [CLK_PLL_AUDIO1_4X] = &pll_audio1_4x_clk.common.hw,
+ [CLK_PLL_AUDIO1_2X] = &pll_audio1_2x_clk.hw,
+ [CLK_PLL_AUDIO1] = &pll_audio1_clk.hw,
+ [CLK_R_AHB] = &r_ahb_clk.common.hw,
+ [CLK_R_APB1] = &r_apb1_clk.common.hw,
+ [CLK_R_APB2] = &r_apb2_clk.common.hw,
+ [CLK_R_BUS_GPADC] = &r_bus_gpadc_clk.common.hw,
+ [CLK_R_BUS_THS] = &r_bus_ths_clk.common.hw,
+ [CLK_R_BUS_DMA] = &r_bus_dma_clk.common.hw,
+ [CLK_R_PWM] = &r_pwm_clk.common.hw,
+ [CLK_R_BUS_PWM] = &r_bus_pwm_clk.common.hw,
+ [CLK_R_CODEC_ADC] = &r_codec_adc_clk.common.hw,
+ [CLK_R_CODEC_DAC] = &r_codec_dac_clk.common.hw,
+ [CLK_R_BUS_CODEC] = &r_bus_codec_clk.common.hw,
+ [CLK_R_DMIC] = &r_dmic_clk.common.hw,
+ [CLK_R_BUS_DMIC] = &r_bus_dmic_clk.common.hw,
+ [CLK_R_BUS_LRADC] = &r_bus_lradc_clk.common.hw,
+ [CLK_R_I2S] = &r_i2s_clk.common.hw,
+ [CLK_R_I2S_ASRC] = &r_i2s_asrc_clk.common.hw,
+ [CLK_R_BUS_I2S] = &r_bus_i2s_clk.common.hw,
+ [CLK_R_BUS_UART] = &r_bus_uart_clk.common.hw,
+ [CLK_R_BUS_I2C] = &r_bus_i2c_clk.common.hw,
+ [CLK_R_IR] = &r_ir_clk.common.hw,
+ [CLK_R_BUS_IR] = &r_bus_ir_clk.common.hw,
+ [CLK_R_BUS_MSGBOX] = &r_bus_msgbox_clk.common.hw,
+ [CLK_R_BUS_SPINLOCK] = &r_bus_spinlock_clk.common.hw,
+ [CLK_R_BUS_RTC] = &r_bus_rtc_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_r329_r_ccu_resets[] = {
+ [RST_R_BUS_GPADC] = { 0x0ec, BIT(16) },
+ [RST_R_BUS_THS] = { 0x0fc, BIT(16) },
+ [RST_R_BUS_DMA] = { 0x10c, BIT(16) },
+ [RST_R_BUS_PWM] = { 0x13c, BIT(16) },
+ [RST_R_BUS_CODEC] = { 0x14c, BIT(16) },
+ [RST_R_BUS_DMIC] = { 0x15c, BIT(16) },
+ [RST_R_BUS_LRADC] = { 0x16c, BIT(16) },
+ [RST_R_BUS_I2S] = { 0x17c, BIT(16) },
+ [RST_R_BUS_UART] = { 0x18c, BIT(16) },
+ [RST_R_BUS_I2C] = { 0x19c, BIT(16) },
+ [RST_R_BUS_IR] = { 0x1cc, BIT(16) },
+ [RST_R_BUS_MSGBOX] = { 0x1dc, BIT(16) },
+ [RST_R_BUS_SPINLOCK] = { 0x1ec, BIT(16) },
+ [RST_R_BUS_RTC] = { 0x20c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_r329_r_ccu_desc = {
+ .ccu_clks = sun50i_r329_r_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun50i_r329_r_ccu_clks),
+
+ .hw_clks = &sun50i_r329_r_hw_clks,
+
+ .resets = sun50i_r329_r_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun50i_r329_r_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+ SUN50I_R329_PLL_CPUX_REG,
+ SUN50I_R329_PLL_PERIPH_REG,
+ SUN50I_R329_PLL_AUDIO0_REG,
+ SUN50I_R329_PLL_AUDIO1_REG,
+};
+
+static void __init sun50i_r329_r_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+ int i;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%pOF: Could not map clock registers\n", node);
+ return;
+ }
+
+ /* Enable the lock bits and the output enable bits on all PLLs */
+ for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+ val = readl(reg + pll_regs[i]);
+ val |= BIT(29) | BIT(27);
+ writel(val, reg + pll_regs[i]);
+ }
+
+ /*
+ * Force the I/O dividers of PLL-AUDIO1 to reset default value
+ *
+ * See the comment before pll-audio1 definition for the reason.
+ */
+
+ val = readl(reg + SUN50I_R329_PLL_AUDIO1_REG);
+ val &= ~BIT(1);
+ val |= BIT(0);
+ writel(val, reg + SUN50I_R329_PLL_AUDIO1_REG);
+
+ i = sunxi_ccu_probe(node, reg, &sun50i_r329_r_ccu_desc);
+ if (i)
+ pr_err("%pOF: probing clocks fails: %d\n", node, i);
+}
+
+CLK_OF_DECLARE(sun50i_r329_r_ccu, "allwinner,sun50i-r329-r-ccu",
+ sun50i_r329_r_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
new file mode 100644
index 000000000000..62cf65322116
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-r329-r.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Sipeed
+ */
+
+#ifndef _CCU_SUN50I_R329_R_H
+#define _CCU_SUN50I_R329_R_H
+
+#include <dt-bindings/clock/sun50i-r329-r-ccu.h>
+#include <dt-bindings/reset/sun50i-r329-r-ccu.h>
+
+#define CLK_PLL_CPUX 0
+#define CLK_PLL_PERIPH_BASE 1
+#define CLK_PLL_PERIPH_2X 2
+#define CLK_PLL_PERIPH_800M 3
+#define CLK_PLL_PERIPH 4
+#define CLK_PLL_AUDIO0 5
+#define CLK_PLL_AUDIO0_DIV2 6
+#define CLK_PLL_AUDIO0_DIV5 7
+#define CLK_PLL_AUDIO1_4X 8
+#define CLK_PLL_AUDIO1_2X 9
+#define CLK_PLL_AUDIO1 10
+#define CLK_R_AHB 11
+
+/* R_APB1 exported for PIO */
+
+#define CLK_R_APB2 13
+
+/* All module / bus gate clocks exported */
+
+#define CLK_NUMBER (CLK_R_BUS_RTC + 1)
+
+#endif /* _CCU_SUN50I_R329_R_H */
diff --git a/include/dt-bindings/clock/sun50i-r329-r-ccu.h b/include/dt-bindings/clock/sun50i-r329-r-ccu.h
new file mode 100644
index 000000000000..df9bc58de5c4
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-r329-r-ccu.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Sipeed
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_
+
+#define CLK_R_APB1 12
+
+#define CLK_R_BUS_GPADC 14
+#define CLK_R_BUS_THS 15
+#define CLK_R_BUS_DMA 16
+#define CLK_R_PWM 17
+#define CLK_R_BUS_PWM 18
+#define CLK_R_CODEC_ADC 19
+#define CLK_R_CODEC_DAC 20
+#define CLK_R_BUS_CODEC 21
+#define CLK_R_DMIC 22
+#define CLK_R_BUS_DMIC 23
+#define CLK_R_BUS_LRADC 24
+#define CLK_R_I2S 25
+#define CLK_R_I2S_ASRC 26
+#define CLK_R_BUS_I2S 27
+#define CLK_R_BUS_UART 28
+#define CLK_R_BUS_I2C 29
+#define CLK_R_IR 30
+#define CLK_R_BUS_IR 31
+#define CLK_R_BUS_MSGBOX 32
+#define CLK_R_BUS_SPINLOCK 33
+#define CLK_R_BUS_RTC 34
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_R329_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-r329-r-ccu.h b/include/dt-bindings/reset/sun50i-r329-r-ccu.h
new file mode 100644
index 000000000000..40644f2f21c6
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-r329-r-ccu.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2021 Sipeed
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_
+
+#define RST_R_BUS_GPADC 0
+#define RST_R_BUS_THS 1
+#define RST_R_BUS_DMA 2
+#define RST_R_BUS_PWM 3
+#define RST_R_BUS_CODEC 4
+#define RST_R_BUS_DMIC 5
+#define RST_R_BUS_LRADC 6
+#define RST_R_BUS_I2S 7
+#define RST_R_BUS_UART 8
+#define RST_R_BUS_I2C 9
+#define RST_R_BUS_IR 10
+#define RST_R_BUS_MSGBOX 11
+#define RST_R_BUS_SPINLOCK 12
+#define RST_R_BUS_RTC 13
+
+#endif /* _DT_BINDINGS_RST_SUN50I_R329_R_CCU_H_ */
--
2.30.2
More information about the linux-arm-kernel
mailing list