[PATCH v2 0/1] arm: topology: parse the topology from the dt
Ruifeng Zhang
ruifeng.zhang0110 at gmail.com
Mon Apr 19 03:55:14 BST 2021
Dietmar Eggemann <dietmar.eggemann at arm.com> 于2021年4月17日周六 上午1:00写道：
>
> On 16/04/2021 13:04, Ruifeng Zhang wrote:
> > Dietmar Eggemann <dietmar.eggemann at arm.com> 于2021年4月16日周五 下午6:39写道：
> >>
> >> On 16/04/2021 11:32, Valentin Schneider wrote:
> >>> On 16/04/21 15:47, Ruifeng Zhang wrote:
>
> [...]
>
> >> I'm confused. Do you have the MT bit set to 1 then? So the issue that
> >> the mpidr handling in arm32's store_cpu_topology() is not correct does
> >> not exist?
> >
> > I have reconfirmed it, the MT bit has been set to 1. I am sorry for
> > the previous messages.
> > The mpidr parse by store_cpu_topology is correct, at least for the sc9863a.
>
> Nice! This is sorted then.
>
> [...]
>
> >> Is this what you need for your arm32 kernel system? Adding the
> >> possibility to parse cpu-map to create Phantom Domains?
> >
> > Yes, I need parse DT cpu-map to create different Phantom Domains.
> > With it, the dts should be change to:
> > cpu-map {
> > cluster0 {
> > core0 {
> > cpu = <&CPU0>;
> > };
> > core1 {
> > cpu = <&CPU1>;
> > };
> > core2 {
> > cpu = <&CPU2>;
> > };
> > core3 {
> > cpu = <&CPU3>;
> > };
> > };
> >
> > cluster1 {
> > core0 {
> > cpu = <&CPU4>;
> > };
> > core1 {
> > cpu = <&CPU5>;
> > };
> > core2 {
> > cpu = <&CPU6>;
> > };
> > core3 {
> > cpu = <&CPU7>;
> > };
> > };
> > };
> >
>
> I'm afraid that this is now a much weaker case to get this into
> mainline.
But it's still a problem and it's not break the original logic ( parse
topology from MPIDR or parse capacity ), only add the support for
parse topology from DT.
I think it should still be merged into the mainline. If don't, the
DynamIQ SoC has some issue in sched and cpufreq.
>
> I'm able to run with an extra cpu-map entry:
Great.
>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index 012d40a7228c..f60d9b448253 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -35,6 +35,29 @@ cpus {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu2>;
> + };
> + core1 {
> + cpu = <&cpu3>;
> + };
> + core2 {
> + cpu = <&cpu4>;
> + };
> + };
> + };
> +
> cpu0: cpu at 0 {
>
> a condensed version (see below) of your patch on my Arm32 TC2.
> The move of update_cpu_capacity() in store_cpu_topology() is only
> necessary when I use the old clock-frequency based cpu_efficiency
> approach for asymmetric CPU capacity (TC2 is a15/a7):
>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index f60d9b448253..e0679cca40ed 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -64,7 +64,7 @@ cpu0: cpu at 0 {
> reg = <0>;
> cci-control-port = <&cci_control1>;
> cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
> - capacity-dmips-mhz = <1024>;
> + clock-frequency = <1000000000>;
> dynamic-power-coefficient = <990>;
> };
>
> @@ -74,7 +74,7 @@ cpu1: cpu at 1 {
> reg = <1>;
> cci-control-port = <&cci_control1>;
> cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
> - capacity-dmips-mhz = <1024>;
> + clock-frequency = <1000000000>;
> dynamic-power-coefficient = <990>;
> };
>
> @@ -84,7 +84,7 @@ cpu2: cpu at 2 {
> reg = <0x100>;
> cci-control-port = <&cci_control2>;
> cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
> - capacity-dmips-mhz = <516>;
> + clock-frequency = <800000000>;
> dynamic-power-coefficient = <133>;
> };
>
> @@ -94,7 +94,7 @@ cpu3: cpu at 3 {
> reg = <0x101>;
> cci-control-port = <&cci_control2>;
> cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
> - capacity-dmips-mhz = <516>;
> + clock-frequency = <800000000>;
> dynamic-power-coefficient = <133>;
> };
>
> @@ -104,7 +104,7 @@ cpu4: cpu at 4 {
> reg = <0x102>;
> cci-control-port = <&cci_control2>;
> cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
> - capacity-dmips-mhz = <516>;
> + clock-frequency = <800000000>;
> dynamic-power-coefficient = <133>;
> };
>
>
>
> diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
> index ef0058de432b..bff56c12c3a6 100644
> --- a/arch/arm/kernel/topology.c
> +++ b/arch/arm/kernel/topology.c
> @@ -82,7 +82,7 @@ static bool cap_from_dt = true;
> * 'average' CPU is of middle capacity. Also see the comments near
> * table_efficiency[] and update_cpu_capacity().
> */
> -static void __init parse_dt_topology(void)
> +static void __init get_coretype_capacity(void)
> {
> const struct cpu_efficiency *cpu_eff;
> struct device_node *cn = NULL;
> @@ -173,7 +173,7 @@ static void update_cpu_capacity(unsigned int cpu)
> }
>
> #else
> -static inline void parse_dt_topology(void) {}
> +static inline void get_coretype_capacity(void) {}
> static inline void update_cpu_capacity(unsigned int cpuid) {}
> #endif
>
> @@ -221,14 +221,13 @@ void store_cpu_topology(unsigned int cpuid)
> cpuid_topo->package_id = -1;
> }
>
> - update_cpu_capacity(cpuid);
> -
> pr_info("CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
> cpuid, cpu_topology[cpuid].thread_id,
> cpu_topology[cpuid].core_id,
> cpu_topology[cpuid].package_id, mpidr);
>
> topology_populated:
> + update_cpu_capacity(cpuid);
Agree, it's more better than mine.
> update_siblings_masks(cpuid);
> }
>
> @@ -241,5 +240,6 @@ void __init init_cpu_topology(void)
> reset_cpu_topology();
> smp_wmb();
>
> + get_coretype_capacity();
> parse_dt_topology();
> }
> diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
> index de8587cc119e..a2335da28f2a 100644
> --- a/drivers/base/arch_topology.c
> +++ b/drivers/base/arch_topology.c
> @@ -295,7 +295,6 @@ static void parsing_done_workfn(struct work_struct *work)
> core_initcall(free_raw_capacity);
> #endif
>
> -#if defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
It seems that the following functions are not defined on other CPU
architectures now, so I agree to remove it.
> /*
> * This function returns the logic cpu number of the node.
> * There are basically three kinds of return values:
> @@ -441,7 +440,7 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
> return 0;
> }
>
> -static int __init parse_dt_topology(void)
> +int __init parse_dt_topology(void)
> {
> struct device_node *cn, *map;
> int ret = 0;
> @@ -481,7 +480,6 @@ static int __init parse_dt_topology(void)
> of_node_put(cn);
> return ret;
> }
> -#endif
>
> /*
> * cpu topology table
> diff --git a/include/linux/arch_topology.h b/include/linux/arch_topology.h
> index 0f6cd6b73a61..cfa5a5072aa0 100644
> --- a/include/linux/arch_topology.h
> +++ b/include/linux/arch_topology.h
> @@ -66,6 +66,7 @@ extern struct cpu_topology cpu_topology[NR_CPUS];
> #define topology_llc_cpumask(cpu) (&cpu_topology[cpu].llc_sibling)
> void init_cpu_topology(void);
> void store_cpu_topology(unsigned int cpuid);
> +int __init parse_dt_topology(void);
> const struct cpumask *cpu_coregroup_mask(int cpu);
> void update_siblings_masks(unsigned int cpu);
> void remove_cpu_topology(unsigned int cpuid);
Why do you keep the logic of topology_parse_cpu_capacity in arm
get_coretype_capacity function? The capacity-dmips-mhz will be parsed
by drivers/base/arch_topology.c as following:
parse_dt_topology
parse_cluster
parse_core
get_cpu_for_node
topology_parse_cpu_capacity
More information about the linux-arm-kernel
mailing list