[PATCH v2 0/1] arm: topology: parse the topology from the dt
Dietmar Eggemann
dietmar.eggemann at arm.com
Fri Apr 16 18:00:32 BST 2021
On 16/04/2021 13:04, Ruifeng Zhang wrote:
> Dietmar Eggemann <dietmar.eggemann at arm.com> 于2021年4月16日周五 下午6:39写道：
>>
>> On 16/04/2021 11:32, Valentin Schneider wrote:
>>> On 16/04/21 15:47, Ruifeng Zhang wrote:
[...]
>> I'm confused. Do you have the MT bit set to 1 then? So the issue that
>> the mpidr handling in arm32's store_cpu_topology() is not correct does
>> not exist?
>
> I have reconfirmed it, the MT bit has been set to 1. I am sorry for
> the previous messages.
> The mpidr parse by store_cpu_topology is correct, at least for the sc9863a.
Nice! This is sorted then.
[...]
>> Is this what you need for your arm32 kernel system? Adding the
>> possibility to parse cpu-map to create Phantom Domains?
>
> Yes, I need parse DT cpu-map to create different Phantom Domains.
> With it, the dts should be change to:
> cpu-map {
> cluster0 {
> core0 {
> cpu = <&CPU0>;
> };
> core1 {
> cpu = <&CPU1>;
> };
> core2 {
> cpu = <&CPU2>;
> };
> core3 {
> cpu = <&CPU3>;
> };
> };
>
> cluster1 {
> core0 {
> cpu = <&CPU4>;
> };
> core1 {
> cpu = <&CPU5>;
> };
> core2 {
> cpu = <&CPU6>;
> };
> core3 {
> cpu = <&CPU7>;
> };
> };
> };
>
I'm afraid that this is now a much weaker case to get this into
mainline.
I'm able to run with an extra cpu-map entry:
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 012d40a7228c..f60d9b448253 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -35,6 +35,29 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ core1 {
+ cpu = <&cpu3>;
+ };
+ core2 {
+ cpu = <&cpu4>;
+ };
+ };
+ };
+
cpu0: cpu at 0 {
a condensed version (see below) of your patch on my Arm32 TC2.
The move of update_cpu_capacity() in store_cpu_topology() is only
necessary when I use the old clock-frequency based cpu_efficiency
approach for asymmetric CPU capacity (TC2 is a15/a7):
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index f60d9b448253..e0679cca40ed 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -64,7 +64,7 @@ cpu0: cpu at 0 {
reg = <0>;
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
- capacity-dmips-mhz = <1024>;
+ clock-frequency = <1000000000>;
dynamic-power-coefficient = <990>;
};
@@ -74,7 +74,7 @@ cpu1: cpu at 1 {
reg = <1>;
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
- capacity-dmips-mhz = <1024>;
+ clock-frequency = <1000000000>;
dynamic-power-coefficient = <990>;
};
@@ -84,7 +84,7 @@ cpu2: cpu at 2 {
reg = <0x100>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
+ clock-frequency = <800000000>;
dynamic-power-coefficient = <133>;
};
@@ -94,7 +94,7 @@ cpu3: cpu at 3 {
reg = <0x101>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
+ clock-frequency = <800000000>;
dynamic-power-coefficient = <133>;
};
@@ -104,7 +104,7 @@ cpu4: cpu at 4 {
reg = <0x102>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
- capacity-dmips-mhz = <516>;
+ clock-frequency = <800000000>;
dynamic-power-coefficient = <133>;
};
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index ef0058de432b..bff56c12c3a6 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -82,7 +82,7 @@ static bool cap_from_dt = true;
* 'average' CPU is of middle capacity. Also see the comments near
* table_efficiency[] and update_cpu_capacity().
*/
-static void __init parse_dt_topology(void)
+static void __init get_coretype_capacity(void)
{
const struct cpu_efficiency *cpu_eff;
struct device_node *cn = NULL;
@@ -173,7 +173,7 @@ static void update_cpu_capacity(unsigned int cpu)
}
#else
-static inline void parse_dt_topology(void) {}
+static inline void get_coretype_capacity(void) {}
static inline void update_cpu_capacity(unsigned int cpuid) {}
#endif
@@ -221,14 +221,13 @@ void store_cpu_topology(unsigned int cpuid)
cpuid_topo->package_id = -1;
}
- update_cpu_capacity(cpuid);
-
pr_info("CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
cpuid, cpu_topology[cpuid].thread_id,
cpu_topology[cpuid].core_id,
cpu_topology[cpuid].package_id, mpidr);
topology_populated:
+ update_cpu_capacity(cpuid);
update_siblings_masks(cpuid);
}
@@ -241,5 +240,6 @@ void __init init_cpu_topology(void)
reset_cpu_topology();
smp_wmb();
+ get_coretype_capacity();
parse_dt_topology();
}
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index de8587cc119e..a2335da28f2a 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -295,7 +295,6 @@ static void parsing_done_workfn(struct work_struct *work)
core_initcall(free_raw_capacity);
#endif
-#if defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
/*
* This function returns the logic cpu number of the node.
* There are basically three kinds of return values:
@@ -441,7 +440,7 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
return 0;
}
-static int __init parse_dt_topology(void)
+int __init parse_dt_topology(void)
{
struct device_node *cn, *map;
int ret = 0;
@@ -481,7 +480,6 @@ static int __init parse_dt_topology(void)
of_node_put(cn);
return ret;
}
-#endif
/*
* cpu topology table
diff --git a/include/linux/arch_topology.h b/include/linux/arch_topology.h
index 0f6cd6b73a61..cfa5a5072aa0 100644
--- a/include/linux/arch_topology.h
+++ b/include/linux/arch_topology.h
@@ -66,6 +66,7 @@ extern struct cpu_topology cpu_topology[NR_CPUS];
#define topology_llc_cpumask(cpu) (&cpu_topology[cpu].llc_sibling)
void init_cpu_topology(void);
void store_cpu_topology(unsigned int cpuid);
+int __init parse_dt_topology(void);
const struct cpumask *cpu_coregroup_mask(int cpu);
void update_siblings_masks(unsigned int cpu);
void remove_cpu_topology(unsigned int cpuid);
More information about the linux-arm-kernel
mailing list