[PATCHv5 2/2] soc: qcom: llcc: Support chipsets that can write to llcc

Sai Prakash Ranjan saiprakash.ranjan at codeaurora.org
Tue Sep 15 02:55:26 EDT 2020


From: "Isaac J. Manjarres" <isaacm at codeaurora.org>

Older chipsets may not be allowed to configure certain LLCC registers
as that is handled by the secure side software. However, this is not
the case for newer chipsets and they must configure these registers
according to the contents of the SCT table, while keeping in mind that
older targets may not have these capabilities. So add support to allow
such configuration of registers to enable capacity based allocation
and power collapse retention for capable chipsets.

Reason for choosing capacity based allocation rather than the default
way based allocation is because capacity based allocation allows more
finer grain partition and provides more flexibility in configuration.
As for the retention through power collapse, it has an advantage where
the cache hits are more when we wake up from power collapse although
it does burn more power but the exact power numbers are not known at
the moment.

Signed-off-by: Isaac J. Manjarres <isaacm at codeaurora.org>
Reviewed-by: Douglas Anderson <dianders at chromium.org>
[saiprakash.ranjan at codeaurora.org: use existing config and reword commit msg]
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan at codeaurora.org>
---
 drivers/soc/qcom/llcc-qcom.c | 32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 14311060099d..8b79bbf96f52 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -45,6 +45,9 @@
 #define LLCC_TRP_ATTR0_CFGn(n)        (0x21000 + SZ_8 * n)
 #define LLCC_TRP_ATTR1_CFGn(n)        (0x21004 + SZ_8 * n)
 
+#define LLCC_TRP_SCID_DIS_CAP_ALLOC   0x21f00
+#define LLCC_TRP_PCB_ACT              0x21f04
+
 #define BANK_OFFSET_STRIDE	      0x80000
 
 /**
@@ -89,6 +92,7 @@ struct llcc_slice_config {
 struct qcom_llcc_config {
 	const struct llcc_slice_config *sct_data;
 	int size;
+	bool need_llcc_cfg;
 };
 
 static const struct llcc_slice_config sc7180_data[] =  {
@@ -122,11 +126,13 @@ static const struct llcc_slice_config sdm845_data[] =  {
 static const struct qcom_llcc_config sc7180_cfg = {
 	.sct_data	= sc7180_data,
 	.size		= ARRAY_SIZE(sc7180_data),
+	.need_llcc_cfg	= true,
 };
 
 static const struct qcom_llcc_config sdm845_cfg = {
 	.sct_data	= sdm845_data,
 	.size		= ARRAY_SIZE(sdm845_data),
+	.need_llcc_cfg	= false,
 };
 
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -318,7 +324,8 @@ size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
 }
 EXPORT_SYMBOL_GPL(llcc_get_slice_size);
 
-static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config)
+static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
+				  const struct qcom_llcc_config *cfg)
 {
 	int ret;
 	u32 attr1_cfg;
@@ -361,6 +368,22 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config)
 	if (ret)
 		return ret;
 
+	if (cfg->need_llcc_cfg) {
+		u32 disable_cap_alloc, retain_pc;
+
+		disable_cap_alloc = config->dis_cap_alloc << config->slice_id;
+		ret = regmap_write(drv_data->bcast_regmap,
+				LLCC_TRP_SCID_DIS_CAP_ALLOC, disable_cap_alloc);
+		if (ret)
+			return ret;
+
+		retain_pc = config->retain_on_pc << config->slice_id;
+		ret = regmap_write(drv_data->bcast_regmap,
+				LLCC_TRP_PCB_ACT, retain_pc);
+		if (ret)
+			return ret;
+	}
+
 	if (config->activate_on_init) {
 		desc.slice_id = config->slice_id;
 		ret = llcc_slice_activate(&desc);
@@ -369,7 +392,8 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config)
 	return ret;
 }
 
-static int qcom_llcc_cfg_program(struct platform_device *pdev)
+static int qcom_llcc_cfg_program(struct platform_device *pdev,
+				 const struct qcom_llcc_config *cfg)
 {
 	int i;
 	u32 sz;
@@ -380,7 +404,7 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev)
 	llcc_table = drv_data->cfg;
 
 	for (i = 0; i < sz; i++) {
-		ret = _qcom_llcc_cfg_program(&llcc_table[i]);
+		ret = _qcom_llcc_cfg_program(&llcc_table[i], cfg);
 		if (ret)
 			return ret;
 	}
@@ -488,7 +512,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 	mutex_init(&drv_data->lock);
 	platform_set_drvdata(pdev, drv_data);
 
-	ret = qcom_llcc_cfg_program(pdev);
+	ret = qcom_llcc_cfg_program(pdev, cfg);
 	if (ret)
 		goto err;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




More information about the linux-arm-kernel mailing list