[PATCH 09/11] arm64: dts: hisilicon: list all clocks required by spi-pl022.yaml

Zhen Lei thunder.leizhen at huawei.com
Mon Oct 12 09:17:37 EDT 2020


The arm,pl022 binding need to specify two clocks: "sspclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.

Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi      | 8 ++++----
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3f6b1715835af06..edb80abf45b327b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -971,8 +971,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
-			clock-names = "apb_pclk";
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>, <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>;
 			num-cs = <1>;
@@ -986,8 +986,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
-			clock-names = "apb_pclk";
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>, <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>;
 			num-cs = <1>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 11a72891e2a3a65..1c7dda972c92856 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -291,8 +291,8 @@
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			num-cs = <1>;
 			cs-gpios = <&gpio7 1 0>;
-			clocks = <&crg HISTB_SPI0_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HISTB_SPI0_CLK>, <&crg HISTB_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 014735a9bc7312d..c6580c9f068ebf7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -725,8 +725,8 @@
 			interrupts = <0 50 4>;
 			bus-id = <0>;
 			enable-dma = <0>;
-			clocks = <&sys_ctrl HI6220_SPI_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
 			num-cs = <1>;
-- 
1.8.3





More information about the linux-arm-kernel mailing list