[PATCH 1/8] arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain

Faiz Abbas faiz_abbas at ti.com
Thu Oct 1 15:05:34 EDT 2020


There are 4 instances of gpio modules in main domain:
	gpio0, gpio2, gpio4 and gpio6

Groups are created to provide protection between different processor virtual
worlds. Each of these modules I/O pins are muxed within the group. Exactly
one module can be selected to control the corresponding pin by selecting it
in the pad mux configuration registers.

This group pins out 69 lines (5 banks).

Add DT modes for each module instance in the main domain.

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 68 +++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4a4fcd24f852..f21f22237e0f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -395,4 +395,72 @@
 		no-1-8-v;
 		dma-coherent;
 	};
+
+	main_gpio0: gpio at 600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>,
+			     <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio2: gpio at 610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>,
+			     <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio4: gpio at 620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>,
+			     <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio6: gpio at 630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>,
+			     <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+	};
 };
-- 
2.17.1




More information about the linux-arm-kernel mailing list