[PATCH 2/2] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files

[Rafał Miłecki]

On 04.11.2020 04:33, Florian Fainelli wrote:
> On 10/28/2020 3:11 AM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal at milecki.pl>
>>
>> They don't descibe hardware fully yet but it's enough to boot a system.
>>
>> Some missing blocks:
>> 1. PMC (Power Management Controller?)
>> 2. Crypto
>> 3. Thermal
>>
>> Asus misses defining full NAND partitions layout and buttons.
>>
>> Further changes will fill those gaps as soon as required bindings will
>> be found / tested / added.
>>
>> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
>> ---
> 
> [snip]
> 
>> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> @@ -0,0 +1,182 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/dts-v1/;
>> +
>> +/ {
>> +	interrupt-parent = <&gic>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "earlycon=bcm63xx_uart,0xff800640";
> 
> These bootargs should be dropped from the

Can you explain why, is that some kernel rule I missed? That's extremely helpful for debugging.


>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu at 0 {
>> +			device_type = "cpu";
>> +			compatible = "brcm,cortex-b53", "arm,cortex-a53";
> 
> Please drop "arm,cortex-a53"
> 
>> +			reg = <0x0>;
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		cpu1: cpu at 1 {
>> +			device_type = "cpu";
>> +			compatible = "brcm,cortex-b53", "arm,cortex-a53";
>> +			reg = <0x1>;
>> +			enable-method = "spin-table";
>> +			cpu-release-addr = <0x0 0xfff8>;
>> +			next-level-cache = <&l2>;
> 
> The device that you have access to did not even ship with a version of PSCI?

Whenever trying to use psci defined as:

psci {
	compatible = "arm,psci-0.2";
	method = "smc";
};

(with updated enable-method) I get:

psci: probing for conduit method from DT.
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/traps.c:406!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-rc2 #3
Hardware name: Asus GT-AC5300 (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO -TCO BTYPE=--)
pc : do_undefinstr+0x2d8/0x300
lr : do_undefinstr+0x2e4/0x300
sp : ffffffc010933c60
x29: ffffffc010933c60 x28: ffffffc01093b680
x27: ffffffc0107a4c40 x26: ffffffc0107bcca0
x25: ffffffc010953c28 x24: 0000000000000080
x23: 0000000080000085 x22: ffffffc01099e100
x21: 00000000d4000003 x20: ffffffc01093b680
x19: ffffffc010933cd0 x18: ffffffc010942fd0
x17: 0000000000001400 x16: 0000000000001c00
x15: fffffffeffe00000 x14: ffffffffffffffff
x13: 0000000000000038 x12: 0101010101010101
x11: 0000000000000004 x10: 0101010101010101
x9 : 0000000000000004 x8 : 0000000000000004
x7 : 0000000000000000 x6 : ffffffc010933cb8
x5 : ffffffc010933cb8 x4 : ffffffc01093cf58
x3 : 0000000000000001 x2 : 0000000000000000
x1 : ffffffc01093b680 x0 : 0000000080000085
Call trace:
  do_undefinstr+0x2d8/0x300
  el1_sync_handler+0xbc/0x140
  el1_sync+0x80/0x100
  __arm_smccc_smc+0x0/0x2c
  psci_probe+0x34/0x2c4
  psci_0_2_init+0x18/0x24
  psci_dt_init+0x64/0x8c
  setup_arch+0x428/0x5c4
  start_kernel+0x78/0x52c
Code: 17ffffa7 f9401bf7 17ffff80 f9001bf7 (d4210000)
random: get_random_bytes called from print_oops_end_marker+0x2c/0x70 with crng_init=0
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill the idle task!


>> +		};
>> +
>> +		cpu2: cpu at 2 {
>> +			device_type = "cpu";
>> +			compatible = "brcm,cortex-b53", "arm,cortex-a53";
>> +			reg = <0x2>;
>> +			enable-method = "spin-table";
>> +			cpu-release-addr = <0x0 0xfff8>;
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		cpu3: cpu at 3 {
>> +			device_type = "cpu";
>> +			compatible = "brcm,cortex-b53", "arm,cortex-a53";
>> +			reg = <0x3>;
>> +			enable-method = "spin-table";
>> +			cpu-release-addr = <0x0 0xfff8>;
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		l2: l2-cache0 {
>> +			compatible = "cache";
>> +		};
>> +	};
>> +
>> +	gic: interrupt-controller at 81000000 {
>> +		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
>> +		#interrupt-cells = <3>;
>> +		#address-cells = <0>;
> 
> You would want to create a node that encapsulates the ARM peripheral
> addresses within the SoC's physical address range, see
> arch/arm/boot/dts/bcm63138.dtsi for an example with the axi bus node.
> 
> [snip]
> 
>> +
>> +			nandcs: nandcs at 0 {
>> +				compatible = "brcm,nandcs";
>> +				reg = <0>;
>> +				nand-on-flash-bbt;
>> +				brcm,nand-has-wp;
> 
> Those last two properties should be moved to the board level DTS file.
> 
>> +			};
>> +		};
>> +
>> +		reboot {
>> +			compatible = "syscon-reboot";
>> +			regmap = <&timer>;
>> +			offset = <0x34>;
>> +			mask = <1>;
>> +		};
>> +	};
>> +};