[PATCH] engine: stm32-dma: call pm_runtime_put if pm_runtime_get_sync fails

[Navid Emamdoost]

Hi,

On Wed, Jun 24, 2020 at 2:39 AM Vinod Koul <vkoul at kernel.org> wrote:
>
> On 03-06-20, 13:34, Navid Emamdoost wrote:
> > Calling pm_runtime_get_sync increments the counter even in case of
> > failure, causing incorrect ref count. Call pm_runtime_put if
> > pm_runtime_get_sync fails.
>
> pls fix subsystem name as dmaengine: ...
> >
> > Signed-off-by: Navid Emamdoost <navid.emamdoost at gmail.com>
> > ---
> >  drivers/dma/stm32-dma.c | 8 ++++++--
> >  1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
> > index 0ddbaa4b4f0b..0aab86bd97fe 100644
> > --- a/drivers/dma/stm32-dma.c
> > +++ b/drivers/dma/stm32-dma.c
> > @@ -1169,8 +1169,10 @@ static int stm32_dma_alloc_chan_resources(struct dma_chan *c)
> >       chan->config_init = false;
> >
> >       ret = pm_runtime_get_sync(dmadev->ddev.dev);
> > -     if (ret < 0)
> > +     if (ret < 0) {
> > +             pm_runtime_put(dmadev->ddev.dev);
> >               return ret;
> > +     }
> >
> >       ret = stm32_dma_disable_chan(chan);
> >       if (ret < 0)
> > @@ -1439,8 +1441,10 @@ static int stm32_dma_suspend(struct device *dev)
> >       int id, ret, scr;
> >
> >       ret = pm_runtime_get_sync(dev);
> > -     if (ret < 0)
> > +     if (ret < 0) {
> > +             pm_runtime_put_sync(dev);
>
> why put_sync()

My bad! I will fix it.

> >               return ret;
> > +     }
> >
> >       for (id = 0; id < STM32_DMA_MAX_CHANNELS; id++) {
> >               scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
> > --
> > 2.17.1
>
> --
> ~Vinod



-- 
Navid.