[PATCH] engine: stm32-dma: call pm_runtime_put if pm_runtime_get_sync fails

[Vinod Koul]

On 03-06-20, 13:34, Navid Emamdoost wrote:
> Calling pm_runtime_get_sync increments the counter even in case of
> failure, causing incorrect ref count. Call pm_runtime_put if
> pm_runtime_get_sync fails.

pls fix subsystem name as dmaengine: ...
> 
> Signed-off-by: Navid Emamdoost <navid.emamdoost at gmail.com>
> ---
>  drivers/dma/stm32-dma.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
> index 0ddbaa4b4f0b..0aab86bd97fe 100644
> --- a/drivers/dma/stm32-dma.c
> +++ b/drivers/dma/stm32-dma.c
> @@ -1169,8 +1169,10 @@ static int stm32_dma_alloc_chan_resources(struct dma_chan *c)
>  	chan->config_init = false;
>  
>  	ret = pm_runtime_get_sync(dmadev->ddev.dev);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		pm_runtime_put(dmadev->ddev.dev);
>  		return ret;
> +	}
>  
>  	ret = stm32_dma_disable_chan(chan);
>  	if (ret < 0)
> @@ -1439,8 +1441,10 @@ static int stm32_dma_suspend(struct device *dev)
>  	int id, ret, scr;
>  
>  	ret = pm_runtime_get_sync(dev);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		pm_runtime_put_sync(dev);

why put_sync()
>  		return ret;
> +	}
>  
>  	for (id = 0; id < STM32_DMA_MAX_CHANNELS; id++) {
>  		scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
> -- 
> 2.17.1

-- 
~Vinod