[PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld

Michael Walle michael at walle.cc
Tue Jul 28 03:57:47 EDT 2020


Am 2020-07-28 09:24, schrieb Lee Jones:
> On Sun, 26 Jul 2020, Michael Walle wrote:
> 
>> Add a device tree bindings for the board management controller found 
>> on
>> the Kontron SMARC-sAL28 board.
>> 
>> Signed-off-by: Michael Walle <michael at walle.cc>
>> Reviewed-by: Rob Herring <robh at kernel.org>
>> ---
>> Changes since v5:
>>  - none
>> 
>> Changes since v4:
>>  - fix the regex of the unit-address
>> 
>> Changes since v3:
>>  - see cover letter
>> 
>>  .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 +++++++
>>  .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++++
>>  .../kontron,sl28cpld-intc.yaml                |  54 +++++++
>>  .../bindings/mfd/kontron,sl28cpld.yaml        | 153 
>> ++++++++++++++++++
>>  .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++++
>>  .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++++
>>  6 files changed, 358 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>>  create mode 100644 
>> Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>>  create mode 100644 
>> Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>>  create mode 100644 
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>>  create mode 100644 
>> Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
>>  create mode 100644 
>> Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml 
>> b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> new file mode 100644
>> index 000000000000..9a63a158a796
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: GPIO driver for the sl28cpld board management controller
>> +
>> +maintainers:
>> +  - Michael Walle <michael at walle.cc>
>> +
>> +description: |
>> +  This module is part of the sl28cpld multi-function device. For more
>> +  details see 
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
> 
> Paths are normally relative.

grep Documentation/ Documentation

I know there are a lot false positives (esp in the first one)..

$ grep -r "\.\./" Documentation | wc -l
1826
$ grep -r "Documentation/" Documentation|wc -l
2862

> 
>> +  There are three flavors of the GPIO controller, one full featured
>> +  input/output with interrupt support (kontron,sl28cpld-gpio), one
>> +  output-only (kontron,sl28-gpo) and one input-only 
>> (kontron,sl28-gpi).
>> +
>> +  Each controller supports 8 GPIO lines.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - kontron,sl28cpld-gpio
>> +      - kontron,sl28cpld-gpi
>> +      - kontron,sl28cpld-gpo
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  "#interrupt-cells":
>> +    const: 2
>> +
>> +  interrupt-controller: true
>> +
>> +  "#gpio-cells":
>> +    const: 2
>> +
>> +  gpio-controller: true
>> +
>> +  gpio-line-names:
>> +      minItems: 1
>> +      maxItems: 8
>> +
>> +required:
>> +  - compatible
>> +  - "#gpio-cells"
>> +  - gpio-controller
>> +
>> +additionalProperties: false
>> diff --git 
>> a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml 
>> b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> new file mode 100644
>> index 000000000000..1cebd61c6c32
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> @@ -0,0 +1,27 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Hardware monitoring driver for the sl28cpld board management 
>> controller
>> +
>> +maintainers:
>> +  - Michael Walle <michael at walle.cc>
>> +
>> +description: |
>> +  This module is part of the sl28cpld multi-function device. For more
>> +  details see 
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - kontron,sl28cpld-fan
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +
>> +additionalProperties: false
>> diff --git 
>> a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml 
>> b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> new file mode 100644
>> index 000000000000..4c39e9ff9aea
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: 
>> http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Interrupt controller driver for the sl28cpld board management 
>> controller
>> +
>> +maintainers:
>> +  - Michael Walle <michael at walle.cc>
>> +
>> +description: |
>> +  This module is part of the sl28cpld multi-function device. For more
>> +  details see 
>> Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>> +
>> +  The following interrupts are available. All types and levels are 
>> fixed
>> +  and handled by the board management controller.
>> +
>> +  ==== ============= ==================================
>> +   IRQ line/device   description
>> +  ==== ============= ==================================
>> +    0  RTC_INT#      Interrupt line from on-board RTC
>> +    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
>> +    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
>> +    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
>> +    4  PWR_BTN#      Event on PWR_BTN# line (P128)
>> +    5  SLEEP#        Event on SLEEP# line (S149)
>> +    6  watchdog      Interrupt of the internal watchdog
>> +    7  n/a           not used
>> +  ==== ============= ==================================
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - kontron,sl28cpld-intc
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  "#interrupt-cells":
>> +    const: 2
>> +
>> +  interrupt-controller: true
>> +
>> +required:
>> +  - compatible
>> +  - interrupts
>> +  - "#interrupt-cells"
>> +  - interrupt-controller
>> +
>> +additionalProperties: false
>> diff --git 
>> a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml 
>> b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> new file mode 100644
>> index 000000000000..e3a62db678e7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> @@ -0,0 +1,153 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Kontron's sl28cpld board management controller
> 
> "S128CPLD" ?

still not, its sl28cpld, think of a project/code name, not the product
appended with CPLD.

> "Board Management Controller (BMC)" ?

sounds like IPMI, which I wanted to avoid.

> 
>> +maintainers:
>> +  - Michael Walle <michael at walle.cc>
>> +
>> +description: |
>> +  The board management controller may contain different IP blocks 
>> like
>> +  watchdog, fan monitoring, PWM controller, interrupt controller and 
>> a
>> +  GPIO controller.
>> +
>> +properties:
>> +  compatible:
>> +    const: kontron,sl28cpld-r1
> 
> We don't usually code revision numbers in compatible strings.
> 
> Is there any way to pull this from the H/W?

No, unfortunately you can't. And I really want to keep that, in case
in the future there are some backwards incompatible changes.

>> +  reg:
>> +    description:
>> +      I2C device address.
>> +    maxItems: 1
>> +
>> +  "#address-cells":
>> +    const: 1
>> +
>> +  "#size-cells":
>> +    const: 0
>> +
>> +  "#interrupt-cells":
>> +    const: 2
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  interrupt-controller: true
>> +
>> +patternProperties:
>> +  "^gpio(@[0-9a-f]+)?$":
>> +    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
>> +
>> +  "^hwmon(@[0-9a-f]+)?$":
>> +    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
>> +
>> +  "^interrupt-controller(@[0-9a-f]+)?$":
>> +    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
>> +
>> +  "^pwm(@[0-9a-f]+)?$":
>> +    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
>> +
>> +  "^watchdog(@[0-9a-f]+)?$":
>> +    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
>> +
>> +required:
>> +  - "#address-cells"
>> +  - "#size-cells"
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    i2c {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        sl28cpld at 4a {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            compatible = "kontron,sl28cpld-r1";
>> +            reg = <0x4a>;
> 
> Nit: Could you put the 'reg' and 'compatible' at the top please?
> 
> Same for all nodes.

Sure, I've looked at previous examples, but they are not
consistent, but it looked to me if the "#" properties are
listed first.

-michael



More information about the linux-arm-kernel mailing list