[PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
Lee Jones
lee.jones at linaro.org
Tue Jul 28 03:24:22 EDT 2020
On Sun, 26 Jul 2020, Michael Walle wrote:
> Add a device tree bindings for the board management controller found on
> the Kontron SMARC-sAL28 board.
>
> Signed-off-by: Michael Walle <michael at walle.cc>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
> Changes since v5:
> - none
>
> Changes since v4:
> - fix the regex of the unit-address
>
> Changes since v3:
> - see cover letter
>
> .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++
> .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++
> .../kontron,sl28cpld-intc.yaml | 54 +++++++
> .../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++
> .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++
> .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++
> 6 files changed, 358 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
> create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
> create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
> create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> new file mode 100644
> index 000000000000..9a63a158a796
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO driver for the sl28cpld board management controller
> +
> +maintainers:
> + - Michael Walle <michael at walle.cc>
> +
> +description: |
> + This module is part of the sl28cpld multi-function device. For more
> + details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
Paths are normally relative.
> + There are three flavors of the GPIO controller, one full featured
> + input/output with interrupt support (kontron,sl28cpld-gpio), one
> + output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
> +
> + Each controller supports 8 GPIO lines.
> +
> +properties:
> + compatible:
> + enum:
> + - kontron,sl28cpld-gpio
> + - kontron,sl28cpld-gpi
> + - kontron,sl28cpld-gpo
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#interrupt-cells":
> + const: 2
> +
> + interrupt-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-controller: true
> +
> + gpio-line-names:
> + minItems: 1
> + maxItems: 8
> +
> +required:
> + - compatible
> + - "#gpio-cells"
> + - gpio-controller
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
> new file mode 100644
> index 000000000000..1cebd61c6c32
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Hardware monitoring driver for the sl28cpld board management controller
> +
> +maintainers:
> + - Michael Walle <michael at walle.cc>
> +
> +description: |
> + This module is part of the sl28cpld multi-function device. For more
> + details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
> +
> +properties:
> + compatible:
> + enum:
> + - kontron,sl28cpld-fan
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
> new file mode 100644
> index 000000000000..4c39e9ff9aea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Interrupt controller driver for the sl28cpld board management controller
> +
> +maintainers:
> + - Michael Walle <michael at walle.cc>
> +
> +description: |
> + This module is part of the sl28cpld multi-function device. For more
> + details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
> +
> + The following interrupts are available. All types and levels are fixed
> + and handled by the board management controller.
> +
> + ==== ============= ==================================
> + IRQ line/device description
> + ==== ============= ==================================
> + 0 RTC_INT# Interrupt line from on-board RTC
> + 1 SMB_ALERT# Event on SMB_ALERT# line (P1)
> + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43)
> + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44)
> + 4 PWR_BTN# Event on PWR_BTN# line (P128)
> + 5 SLEEP# Event on SLEEP# line (S149)
> + 6 watchdog Interrupt of the internal watchdog
> + 7 n/a not used
> + ==== ============= ==================================
> +
> +properties:
> + compatible:
> + enum:
> + - kontron,sl28cpld-intc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#interrupt-cells":
> + const: 2
> +
> + interrupt-controller: true
> +
> +required:
> + - compatible
> + - interrupts
> + - "#interrupt-cells"
> + - interrupt-controller
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
> new file mode 100644
> index 000000000000..e3a62db678e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
> @@ -0,0 +1,153 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kontron's sl28cpld board management controller
"S128CPLD" ?
"Board Management Controller (BMC)" ?
> +maintainers:
> + - Michael Walle <michael at walle.cc>
> +
> +description: |
> + The board management controller may contain different IP blocks like
> + watchdog, fan monitoring, PWM controller, interrupt controller and a
> + GPIO controller.
> +
> +properties:
> + compatible:
> + const: kontron,sl28cpld-r1
We don't usually code revision numbers in compatible strings.
Is there any way to pull this from the H/W?
> + reg:
> + description:
> + I2C device address.
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + "#interrupt-cells":
> + const: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> +patternProperties:
> + "^gpio(@[0-9a-f]+)?$":
> + $ref: ../gpio/kontron,sl28cpld-gpio.yaml
> +
> + "^hwmon(@[0-9a-f]+)?$":
> + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
> +
> + "^interrupt-controller(@[0-9a-f]+)?$":
> + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
> +
> + "^pwm(@[0-9a-f]+)?$":
> + $ref: ../pwm/kontron,sl28cpld-pwm.yaml
> +
> + "^watchdog(@[0-9a-f]+)?$":
> + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
> +
> +required:
> + - "#address-cells"
> + - "#size-cells"
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sl28cpld at 4a {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "kontron,sl28cpld-r1";
> + reg = <0x4a>;
Nit: Could you put the 'reg' and 'compatible' at the top please?
Same for all nodes.
> + watchdog at 4 {
> + compatible = "kontron,sl28cpld-wdt";
> + reg = <0x4>;
> + kontron,assert-wdt-timeout-pin;
> + };
> +
> + hwmon at b {
> + compatible = "kontron,sl28cpld-fan";
> + reg = <0xb>;
> + };
> +
> + pwm at c {
> + #pwm-cells = <2>;
> + compatible = "kontron,sl28cpld-pwm";
> + reg = <0xc>;
> + };
> +
> + pwm at e {
> + #pwm-cells = <2>;
> + compatible = "kontron,sl28cpld-pwm";
> + reg = <0xe>;
> + };
> +
> + gpio at 10 {
> + compatible = "kontron,sl28cpld-gpio";
> + reg = <0x10>;
> + interrupts-extended = <&gpio2 6
> + IRQ_TYPE_EDGE_FALLING>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-line-names = "a", "b", "c";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio at 15 {
> + compatible = "kontron,sl28cpld-gpio";
> + reg = <0x15>;
> + interrupts-extended = <&gpio2 6
> + IRQ_TYPE_EDGE_FALLING>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio at 1a {
> + compatible = "kontron,sl28cpld-gpo";
> + reg = <0x1a>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpio at 1b {
> + compatible = "kontron,sl28cpld-gpi";
> + reg = <0x1b>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + interrupt-controller at 1c {
> + compatible = "kontron,sl28cpld-intc";
> + reg = <0x1c>;
> + interrupts-extended = <&gpio2 6
> + IRQ_TYPE_EDGE_FALLING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> + };
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list