[GIT PULL] TI K3 SoC DT changes for v5.9
Tero Kristo
t-kristo at ti.com
Fri Jul 24 04:43:29 EDT 2020
Hello ARM SoC maintainers,
Please pull following changes towards 5.9.
There is a single dt-binding patch (acked by Rob) included along with
the DTS changes.
-Tero
---
The following changes since commit b3a9e3b9622ae10064826dccb4f7a52bd88c7407:
Linux 5.8-rc1 (2020-06-14 12:45:04 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux
ti-k3-dt-for-v5.9
for you to fetch changes up to 04fe6477efce92adaf373a6044c90fa8445d2bff:
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C
DIR line (2020-07-17 10:35:08 +0300)
----------------------------------------------------------------
Texas Instruments K3 SoC DT updates for v5.9
- Add platforms chipid nodes for am65x and j721e
- Update latest data sheet values for MMC on am65x
- Add serdes and usb3 support for j721e
- Add analog audio support for j721e
- Add SD card support for am65x
- Rename DT nodes for gic-its/smmu to their standard counterparts
am65x/j721e
- HTTP links replaced with HTTPS ones
----------------------------------------------------------------
Alexander A. Klimov (1):
arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones
Faiz Abbas (3):
arm64: dts: ti: k3-am654-main: Update otap-del-sel values
arm64: dts: ti: k3-am65-main: Add support for sdhci1
arm64: dts: ti: k3-am654-base-board: Add support for SD card
Grygorii Strashko (4):
arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node
arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid
module node
arm64: dts: ti: k3-j721e-main: rename smmu node to iommu
arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to
msi-controller
Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
arm64: dts: ti: k3-j721e-main: Add system controller node and
SERDES lane mux
Peter Ujfalusi (2):
arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated
main_i2c1_exp4_pins_default
arm64: dts: ti: j721e-common-proc-board: Analog audio support
Roger Quadros (4):
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e
system controller
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: k3-j721e-proc-board: Add wait time for sampling
Type-C DIR line
.../bindings/mfd/ti,j721e-system-controller.yaml | 74 ++++++
arch/arm64/boot/dts/ti/Makefile | 2 +-
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 38 ++-
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 7 +-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 27 +-
arch/arm64/boot/dts/ti/k3-am654.dtsi | 2 +-
.../boot/dts/ti/k3-j721e-common-proc-board.dts | 171 ++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 281
++++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 7 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +-
include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++
include/dt-bindings/pinctrl/k3.h | 2 +-
15 files changed, 651 insertions(+), 21 deletions(-)
create mode 100644
Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the linux-arm-kernel
mailing list