[PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
dillon min
dillon.minfei at gmail.com
Tue Jul 21 06:39:16 EDT 2020
Hi Alexandre,
On Tue, Jul 21, 2020 at 5:19 PM Alexandre Torgue
<alexandre.torgue at st.com> wrote:
>
> Hi Dillon
>
> On 5/25/20 5:40 AM, dillon.minfei at gmail.com wrote:
> > From: dillon min <dillon.minfei at gmail.com>
> >
> > V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
> > for SPI_SIMPLEX_RX mode on stm32 spi controller.
> >
> > V5:
> > 1 instead of add send dummy data out under SIMPLEX_RX mode,
> > add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
> > 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
> > 'SPI_3WIRE' mode
> >
>
> Concerning DT patches, they look goods for me. However I'll merge them
> when drivers parts will be merged.
>
> regards
> Alex
This patchset status is :
dts:
ARM: dts: stm32: Add dma config for spi5
ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
stm32429-disco board
panel-bindings: Reviewed-by: Rob Herring, need more reviewing to merge
dt-bindings: display: panel: Add ilitek ili9341 panel bindings
clk: Acked-by: Stephen Boyd , need more reviewing to merge
clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
turn off by clk_disable_unused()
drm-panel: Reviewed-by: Linus Walleij . need more reviewing to merge
drm/panel: Add ilitek ili9341 panel driver
spi-driver: Acked-by: Mark Brown ,merged into mainline
spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
becoexit with 'SPI_3WIRE' mode
For ili9341 drivers, it seems to need more time to review, or might be dropped.
since the drm maintainer might create a new interface to support
DPI,DBI,DSI in one driver.
Currently it's under discussion. I will rework the ili9341 driver after that.
But, we can use the existing "drivers/gpu/drm/tiny/ili9341.c" driver to support
ili9341 on stm32f429-disco board only using the spi bus. except the
display refresh performance is not as good as the ltdc interface.
I can submit a new patch just with dts changed this week for it, if you need.
Thanks,
Dillon.
>
>
>
> > V4:
> > According to alexandre torgue's suggestion, combine ili9341 and
> > l3gd20's modification on stm32f429-disco board to one patchset.
> >
> > Changes:
> >
> > ili9341:
> >
> > 1 update ili9341 panel driver according to Linus's suggestion
> > 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
> > 3 merge l3gd20's change to this patchset
> >
> > V3:
> > 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
> > to support serial spi & parallel rgb interface in one driver.
> > 2 update ilitek,ili9341.yaml dts binding documentation.
> > 3 update stm32f429-disco dts binding
> >
> > V2:
> > 1 verify ilitek,ili9341.yaml with make O=../linux-stm32
> > dt_binding_check
> > DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
> > ilitek,ili9341.yaml
> >
> > V1:
> > 1 add ili9341 drm panel driver
> > 2 add ltdc, spi5 controller for stm32f429-disco
> > 3 add ltdc, spi5 pin map for stm32f429-disco
> > 4 add docs about ili9341
> > 5 fix ltdc driver loading hang in clk set rate bug
> >
> >
> > L3gd20:
> > V3:
> > 1 merge stm32f429-disco dtbs binding with ili9341 part
> >
> > V2:
> > 1 insert blank line at stm32f420-disco.dts line 143
> > 2 add more description for l3gd20 in commit message
> >
> > V1:
> > 1 enable spi5 controller on stm32f429-disco (dts)
> > 2 add spi5 pinmap for stm32f429-disco (dts)
> > 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
> >
> >
> > dillon min (8):
> > ARM: dts: stm32: Add dma config for spi5
> > ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
> > ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
> > stm32429-disco board
> > dt-bindings: display: panel: Add ilitek ili9341 panel bindings
> > clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
> > fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
> > turn off by clk_disable_unused()
> > drm/panel: Add ilitek ili9341 panel driver
> > spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
> > spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
> > be coexit with 'SPI_3WIRE' mode
> >
> > .../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
> > arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
> > arch/arm/boot/dts/stm32f429-disco.dts | 48 +
> > arch/arm/boot/dts/stm32f429.dtsi | 3 +
> > drivers/clk/clk-stm32f4.c | 7 +-
> > drivers/gpu/drm/panel/Kconfig | 12 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
> > drivers/spi/spi-stm32.c | 19 +-
> > drivers/spi/spi.c | 3 +-
> > 10 files changed, 1521 insertions(+), 9 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> > create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> >
More information about the linux-arm-kernel
mailing list