[PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Alexandre Torgue
alexandre.torgue at st.com
Tue Jul 21 05:19:47 EDT 2020
Hi Dillon
On 5/25/20 5:40 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei at gmail.com>
>
> V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
> for SPI_SIMPLEX_RX mode on stm32 spi controller.
>
> V5:
> 1 instead of add send dummy data out under SIMPLEX_RX mode,
> add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
> 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
> 'SPI_3WIRE' mode
>
Concerning DT patches, they look goods for me. However I'll merge them
when drivers parts will be merged.
regards
Alex
> V4:
> According to alexandre torgue's suggestion, combine ili9341 and
> l3gd20's modification on stm32f429-disco board to one patchset.
>
> Changes:
>
> ili9341:
>
> 1 update ili9341 panel driver according to Linus's suggestion
> 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
> 3 merge l3gd20's change to this patchset
>
> V3:
> 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
> to support serial spi & parallel rgb interface in one driver.
> 2 update ilitek,ili9341.yaml dts binding documentation.
> 3 update stm32f429-disco dts binding
>
> V2:
> 1 verify ilitek,ili9341.yaml with make O=../linux-stm32
> dt_binding_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
> ilitek,ili9341.yaml
>
> V1:
> 1 add ili9341 drm panel driver
> 2 add ltdc, spi5 controller for stm32f429-disco
> 3 add ltdc, spi5 pin map for stm32f429-disco
> 4 add docs about ili9341
> 5 fix ltdc driver loading hang in clk set rate bug
>
>
> L3gd20:
> V3:
> 1 merge stm32f429-disco dtbs binding with ili9341 part
>
> V2:
> 1 insert blank line at stm32f420-disco.dts line 143
> 2 add more description for l3gd20 in commit message
>
> V1:
> 1 enable spi5 controller on stm32f429-disco (dts)
> 2 add spi5 pinmap for stm32f429-disco (dts)
> 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
>
>
> dillon min (8):
> ARM: dts: stm32: Add dma config for spi5
> ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
> ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
> stm32429-disco board
> dt-bindings: display: panel: Add ilitek ili9341 panel bindings
> clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
> fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
> turn off by clk_disable_unused()
> drm/panel: Add ilitek ili9341 panel driver
> spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
> spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
> be coexit with 'SPI_3WIRE' mode
>
> .../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
> arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
> arch/arm/boot/dts/stm32f429-disco.dts | 48 +
> arch/arm/boot/dts/stm32f429.dtsi | 3 +
> drivers/clk/clk-stm32f4.c | 7 +-
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
> drivers/spi/spi-stm32.c | 19 +-
> drivers/spi/spi.c | 3 +-
> 10 files changed, 1521 insertions(+), 9 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
>
More information about the linux-arm-kernel
mailing list