[RESEND PATCH v3 0/6] soc: xilinx: vcu: provide interfaces for other drivers

[Rohit Visavalia]

+Rajan & Tejas

Can you please review the patch series? As it contains changes related to clock providers & mfd/syscon and you have already made similar changes for CCF and MFD in current Xilinx repos, so that both changes can be in sync for future upgrades.

Thanks
Rohit

> -----Original Message-----
> From: Michal Simek [mailto:michal.simek at xilinx.com]
> Sent: Monday, July 13, 2020 1:25 PM
> To: Michael Tretter <m.tretter at pengutronix.de>; linux-arm-
> kernel at lists.infradead.org
> Cc: Rohit Visavalia <RVISAVAL at xilinx.com>; Michal Simek
> <michals at xilinx.com>; Dhaval Rajeshbhai Shah <dshah at xilinx.com>; Greg
> Kroah-Hartman <gregkh at linuxfoundation.org>; kernel at pengutronix.de
> Subject: Re: [RESEND PATCH v3 0/6] soc: xilinx: vcu: provide interfaces for
> other drivers
> 
> Hi,
> 
> On 19. 06. 20 9:59, Michael Tretter wrote:
> > Hello,
> >
> > I'm resending v3 of the series to expose interfaces that can be used
> > by other drivers from the xlnx_vcu driver, because unfortunately there
> > wasn't any feedback on the actual code changes in the series.
> >
> > This driver controls the glue between the ZynqMP and the actual video
> > codec unit.  Therefore, a driver for the video codec unit (i.e. the
> > allegro-dvt
> > driver) needs to be able to control the glue and read information
> > about the codec configuration from the glue. The interfaces to do so
> > are exposed by this patch series.
> >
> > This resend contains Rob Herring's Acked-By and Reviewed-By for the
> > device tree changes.
> >
> > Michael
> >
> > Changelog:
> >
> > v2 -> v3:
> > - drop unused xvcu_reset() function
> >
> > v1 -> v2:
> > - drop custom select for syscon
> > - unregister registered clocks on driver remove
> >
> > Michael Tretter (6):
> >   soc: xilinx: vcu: drop useless success message
> >   ARM: dts: define indexes for output clocks
> >   soc: xilinx: vcu: implement clock provider for output clocks
> >   dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
> >   soc: xilinx: vcu: use vcu-settings syscon registers
> >   soc: xilinx: vcu: add missing register NUM_CORE
> >
> >  .../soc/xilinx/xlnx,vcu-settings.yaml         |  34 ++++
> >  .../bindings/soc/xilinx/xlnx,vcu.txt          |   9 +-
> >  drivers/soc/xilinx/Kconfig                    |   3 +-
> >  drivers/soc/xilinx/xlnx_vcu.c                 | 158 ++++++++++++------
> >  include/dt-bindings/clock/xlnx-vcu.h          |  15 ++
> >  include/linux/mfd/syscon/xlnx-vcu.h           |  39 +++++
> >  6 files changed, 200 insertions(+), 58 deletions(-)  create mode
> > 100644
> > Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
> >  create mode 100644 include/dt-bindings/clock/xlnx-vcu.h
> >  create mode 100644 include/linux/mfd/syscon/xlnx-vcu.h
> >
> 
> Rohit, Dhaval: Can you please comment it?
> 
> Thanks,
> Michal