[RESEND PATCH v3 0/6] soc: xilinx: vcu: provide interfaces for other drivers

[Michal Simek]

Hi,

On 19. 06. 20 9:59, Michael Tretter wrote:
> Hello,
> 
> I'm resending v3 of the series to expose interfaces that can be used by other
> drivers from the xlnx_vcu driver, because unfortunately there wasn't any
> feedback on the actual code changes in the series.
> 
> This driver controls the glue between the ZynqMP and the actual video codec
> unit.  Therefore, a driver for the video codec unit (i.e. the allegro-dvt
> driver) needs to be able to control the glue and read information about the
> codec configuration from the glue. The interfaces to do so are exposed by this
> patch series.
> 
> This resend contains Rob Herring's Acked-By and Reviewed-By for the device
> tree changes.
> 
> Michael
> 
> Changelog:
> 
> v2 -> v3:
> - drop unused xvcu_reset() function
> 
> v1 -> v2:
> - drop custom select for syscon
> - unregister registered clocks on driver remove
> 
> Michael Tretter (6):
>   soc: xilinx: vcu: drop useless success message
>   ARM: dts: define indexes for output clocks
>   soc: xilinx: vcu: implement clock provider for output clocks
>   dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
>   soc: xilinx: vcu: use vcu-settings syscon registers
>   soc: xilinx: vcu: add missing register NUM_CORE
> 
>  .../soc/xilinx/xlnx,vcu-settings.yaml         |  34 ++++
>  .../bindings/soc/xilinx/xlnx,vcu.txt          |   9 +-
>  drivers/soc/xilinx/Kconfig                    |   3 +-
>  drivers/soc/xilinx/xlnx_vcu.c                 | 158 ++++++++++++------
>  include/dt-bindings/clock/xlnx-vcu.h          |  15 ++
>  include/linux/mfd/syscon/xlnx-vcu.h           |  39 +++++
>  6 files changed, 200 insertions(+), 58 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
>  create mode 100644 include/dt-bindings/clock/xlnx-vcu.h
>  create mode 100644 include/linux/mfd/syscon/xlnx-vcu.h
> 

Rohit, Dhaval: Can you please comment it?

Thanks,
Michal