[PATCH v30 15/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node

[Dan Murphy]

Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Acked-by: Pavel Machek <pavel at ucw.cz>
Signed-off-by: Dan Murphy <dmurphy at ti.com>
CC: Shawn Guo <shawnguo at kernel.org>
CC: Sascha Hauer <s.hauer at pengutronix.de>
CC: Pengutronix Kernel Team <kernel at pengutronix.de>
CC: Fabio Estevam <festevam at gmail.com>
CC: NXP Linux Team <linux-imx at nxp.com>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..77aa90640052 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -258,29 +258,35 @@ leds: led-controller at 30 {
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		chan0 {
+		chan at 0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan at 1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan at 2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan at 3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
 		};
 	};
 
-- 
2.27.0