[PATCH v30 14/16] ARM: dts: n900: Add reg property to the LP5523 channel node

Dan Murphy dmurphy at ti.com
Mon Jul 13 11:45:42 EDT 2020


Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy at ti.com>
Acked-by: Tony Lindgren <tony at atomide.com>
CC: Tony Lindgren <tony at atomide.com>
CC: "Benoît Cousson" <bcousson at baylibre.com>
Acked-by: Pavel Machek <pavel at ucw.cz>
---
 arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..ebe93b06b4f7 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -618,63 +618,74 @@ indicator {
 	};
 
 	lp5523: lp5523 at 32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		chan at 0 {
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan at 1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan at 2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan at 3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <3>;
 		};
 
-		chan4 {
+		chan at 4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <4>;
 		};
 
-		chan5 {
+		chan at 5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <5>;
 		};
 
-		chan6 {
+		chan at 6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <6>;
 		};
 
-		chan7 {
+		chan at 7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <7>;
 		};
 
-		chan8 {
+		chan at 8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <8>;
 		};
 	};
 
-- 
2.27.0




More information about the linux-arm-kernel mailing list