[PATCH 14/21] iommu/mediatek: Add single domain

Yong Wu yong.wu at mediatek.com
Sat Jul 11 02:48:39 EDT 2020


Defaultly the iova range is 0-4G. here we add a single-domain(0-4G)
for the previous SoC. this also is a preparing patch for supporting
multi-domains.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fdfdb75706e0..db1f06324ecc 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -156,6 +156,10 @@ struct mtk_iommu_iova_region {
 	size_t			size;
 };
 
+static const struct mtk_iommu_iova_region single_domain[] = {
+	{.iova_base = 0, .size = SZ_4G},
+};
+
 /*
  * There may be 1 or 2 M4U HWs, But we always expect they are in the same domain
  * for the performance.
@@ -900,6 +904,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 	.m4u_plat     = M4U_MT2712,
 	.flags        = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG,
 	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
+	.iova_region  = single_domain,
+	.iova_region_nr = ARRAY_SIZE(single_domain),
 	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
 };
 
@@ -907,6 +913,8 @@ static const struct mtk_iommu_plat_data mt6779_data = {
 	.m4u_plat      = M4U_MT6779,
 	.flags         = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN,
 	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
+	.iova_region   = single_domain,
+	.iova_region_nr = ARRAY_SIZE(single_domain),
 	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
 };
 
@@ -914,6 +922,8 @@ static const struct mtk_iommu_plat_data mt8173_data = {
 	.m4u_plat     = M4U_MT8173,
 	.flags	      = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
 	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
+	.iova_region  = single_domain,
+	.iova_region_nr = ARRAY_SIZE(single_domain),
 	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
 };
 
@@ -921,6 +931,8 @@ static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
 	.flags        = RESET_AXI,
 	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
+	.iova_region  = single_domain,
+	.iova_region_nr = ARRAY_SIZE(single_domain),
 	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
 };
 
-- 
2.18.0


More information about the linux-arm-kernel mailing list