[PATCH] arm: DT: vf610-zii-scu4-aib.dts: Configure fibre ports to 1000BaseX

[Chris Healy]

The SFF soldered onto the board expect the ports to use 1000BaseX.  It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Chris Healy <cphealy at gmail.com>
---
 arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
                     port at 2 {
                         reg = <2>;
                         label = "eth_fc_1000_2";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff1>;
                     };
@@ -194,7 +194,7 @@
                     port at 3 {
                         reg = <3>;
                         label = "eth_fc_1000_3";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff2>;
                     };
@@ -202,7 +202,7 @@
                     port at 4 {
                         reg = <4>;
                         label = "eth_fc_1000_4";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff3>;
                     };
@@ -210,7 +210,7 @@
                     port at 5 {
                         reg = <5>;
                         label = "eth_fc_1000_5";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff4>;
                     };
@@ -218,7 +218,7 @@
                     port at 6 {
                         reg = <6>;
                         label = "eth_fc_1000_6";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff5>;
                     };
@@ -226,7 +226,7 @@
                     port at 7 {
                         reg = <7>;
                         label = "eth_fc_1000_7";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff6>;
                     };
@@ -234,7 +234,7 @@
                     port at 9 {
                         reg = <9>;
                         label = "eth_fc_1000_1";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff0>;
                     };
@@ -269,7 +269,7 @@
                     port at 2 {
                         reg = <2>;
                         label = "eth_fc_1000_8";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff7>;
                     };
@@ -277,7 +277,7 @@
                     port at 3 {
                         reg = <3>;
                         label = "eth_fc_1000_9";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff8>;
                     };
@@ -285,7 +285,7 @@
                     port at 4 {
                         reg = <4>;
                         label = "eth_fc_1000_10";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff9>;
                     };
-- 
2.21.3