[PATCH v6 00/13] Add support for PinePhone LCD panel

[Ondřej Jirman]

Hello Sam,

On Wed, Jul 01, 2020 at 05:25:32PM +0200, Sam Ravnborg wrote:
> Hi Ondrej.
> 
> On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote:
> > This patchset adds support for the LCD panel of PinePhone.
> > 
> > I've tested this on PinePhone 1.0 and 1.2.
> > 
> > Please take a look.
> > 
> > thank you and regards,
> >   Ondrej Jirman
> > 
> > Changes in v6:
> > - Fixed spacing in yaml
> > - Fixed wrong vccio->iovcc supply name in the bindings doc
> > - I noticed that the original driver uses a delay of 20ms in the init
> >   function to achieve a combined total of 120ms required from post-reset
> >   to display_on. I've added a similar delay to xbd599_init, so that
> >   xbd599 panel also has the right timing. (patch 9)
> > - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch
> > - Added review/ack tags
> > - Learned to run dt_binding_check by myself ;)
> The patch-set does not apply clean on top of drm-misc-next - due to
> vrefresh removal.
> Please re-spin.

Sorry for that. Rebased and retested.

thank you,
	o.

> 	Sam