[PATCH 2/7] arm64: dts: ls1028a: use constants in the clockgen phandle
Michael Walle
michael at walle.cc
Tue Dec 29 06:47:35 EST 2020
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael at walle.cc>
---
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +-
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++-----
2 files changed, 120 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index c45d7b40e374..ed4e69e87e30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -8,6 +8,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls1028a-kontron-sl28.dts"
/ {
@@ -120,7 +122,8 @@
mclk: clock-mclk at f130080 {
compatible = "fsl,vf610-sai-clock";
reg = <0x0 0xf130080 0x0 0x80>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
#clock-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5872ccb3772a..0c05aa8a998c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -41,7 +42,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -235,7 +236,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -245,7 +247,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -255,7 +258,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -265,7 +269,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -275,7 +280,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -285,7 +291,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -295,7 +302,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -305,7 +313,8 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -317,7 +326,8 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 0>, <&clockgen 2 0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 0>,
+ <&clockgen QORIQ_CLK_HWACCEL 0>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -329,7 +339,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -344,7 +355,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -359,7 +371,8 @@
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
@@ -372,7 +385,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -385,7 +398,7 @@
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
broken-cd;
@@ -398,7 +411,8 @@
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -407,7 +421,8 @@
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -416,7 +431,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -424,7 +440,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -433,7 +450,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 32>,
@@ -445,7 +463,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 30>,
@@ -457,7 +476,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 28>,
@@ -469,7 +489,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 26>,
@@ -481,7 +502,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 24>,
@@ -493,7 +515,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 22>,
@@ -512,8 +535,10 @@
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
gpio1: gpio at 2300000 {
@@ -575,7 +600,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -747,14 +773,20 @@
cluster1_core0_watchdog: watchdog at c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog at c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -763,8 +795,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf100000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
@@ -778,8 +816,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf110000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
@@ -793,8 +837,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf120000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 8>,
@@ -808,8 +858,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf130000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
@@ -823,8 +879,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf140000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 12>,
@@ -838,8 +900,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf150000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 14>,
@@ -961,7 +1029,7 @@
ethernet at 0,4 {
compatible = "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
- clocks = <&clockgen 2 3>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
fsl,extts-fifo;
};
@@ -1056,8 +1124,10 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
- <&clockgen 2 2>;
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;
--
2.20.1
More information about the linux-arm-kernel
mailing list