[PATCH 3/7] arm64: dts: ls1043a: use constants in the clockgen phandle
Michael Walle
michael at walle.cc
Tue Dec 29 06:47:36 EST 2020
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael at walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 73 ++++++++++++-------
.../boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +-
2 files changed, 52 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index bbae4b353d3f..073f17ed634f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <Mingkai.hu at freescale.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -44,7 +45,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -54,7 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -64,7 +65,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -74,7 +75,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -377,7 +378,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <0 99 0x4>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -476,7 +480,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -489,7 +494,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <0 65 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -502,7 +508,8 @@
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -516,7 +523,8 @@
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -527,7 +535,8 @@
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <0 58 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -538,7 +547,8 @@
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <0 59 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -546,28 +556,32 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart1: serial at 21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart2: serial at 21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart3: serial at 21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
gpio1: gpio at 2300000 {
@@ -679,7 +693,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <0 48 0x4>;
- clocks = <&clockgen 0 0>;
+ clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg";
status = "disabled";
};
@@ -688,7 +702,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <0 49 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -697,7 +712,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <0 50 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -706,7 +722,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <0 51 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -715,7 +732,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <0 52 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -724,7 +742,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <0 53 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -733,7 +752,8 @@
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "wdog";
big-endian;
};
@@ -750,8 +770,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 0>,
- <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
usb0: usb at 2f00000 {
@@ -793,7 +815,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 4338db14c5da..ae1c2abaaf36 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -6,6 +6,8 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
fman0: fman at 1a00000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -15,7 +17,7 @@ fman0: fman at 1a00000 {
reg = <0x0 0x1a00000 0x0 0xfe000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
@@ -81,6 +83,6 @@ ptp_timer0: ptp-timer at 1afe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x0 0x1afe000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
fsl,extts-fifo;
};
--
2.20.1
More information about the linux-arm-kernel
mailing list