[PATCH V2 1/3] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the json-schema
Rafał Miłecki
zajec5 at gmail.com
Mon Dec 21 00:23:37 EST 2020
From: Rafał Miłecki <rafal at milecki.pl>
Changes that require mentioning:
1. interrupt-names
Name "wakeup" was changed to the "wake". It matches example and what
Linux driver looks for in the first place
2. brcm,ipp and brcm,ioc
Both were described as booleans with 0 / 1 values. In examples they
were integers and Linux driver checks for int as well.
I made both uint32 but that probably should be refactored later.
3. Added minimal description
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
V2: Add Al as maintainer
---
.../bindings/phy/brcm,brcmstb-usb-phy.txt | 86 --------
.../bindings/phy/brcm,brcmstb-usb-phy.yaml | 196 ++++++++++++++++++
2 files changed, 196 insertions(+), 86 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
deleted file mode 100644
index 698aacbdcfc4..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Broadcom STB USB PHY
-
-Required properties:
-- compatible: should be one of
- "brcm,brcmstb-usb-phy"
- "brcm,bcm7216-usb-phy"
- "brcm,bcm7211-usb-phy"
-
-- reg and reg-names properties requirements are specific to the
- compatible string.
- "brcm,brcmstb-usb-phy":
- - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
- and an optional pair for systems with USB 3.x support
- - reg-names: not specified
- "brcm,bcm7216-usb-phy":
- - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
- registers
- - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
- "brcm,bcm7211-usb-phy":
- - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
- USB_PHY and USB_MDIO registers and an optional pair
- for the BDC registers
- - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-
-- #phy-cells: Shall be 1 as it expects one argument for setting
- the type of the PHY. Possible values are:
- - PHY_TYPE_USB2 for USB1.1/2.0 PHY
- - PHY_TYPE_USB3 for USB3.x PHY
-
-Optional Properties:
-- clocks : clock phandles.
-- clock-names: String, clock name.
-- interrupts: wakeup interrupt
-- interrupt-names: "wakeup"
-- brcm,ipp: Boolean, Invert Port Power.
- Possible values are: 0 (Don't invert), 1 (Invert)
-- brcm,ioc: Boolean, Invert Over Current detection.
- Possible values are: 0 (Don't invert), 1 (Invert)
-- dr_mode: String, PHY Device mode.
- Possible values are: "host", "peripheral ", "drd" or "typec-pd"
- If this property is not defined, the phy will default to "host" mode.
-- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-
-
-Example:
-
-usbphy_0: usb-phy at f0470200 {
- reg = <0xf0470200 0xb8>,
- <0xf0471940 0x6c0>;
- compatible = "brcm,brcmstb-usb-phy";
- #phy-cells = <1>;
- dr_mode = "host"
- brcm,ioc = <1>;
- brcm,ipp = <1>;
- brcm,has-xhci;
- brcm,has-eohci;
- clocks = <&usb20>, <&usb30>;
- clock-names = "sw_usb", "sw_usb3";
-};
-
-usb-phy at 29f0200 {
- reg = <0x29f0200 0x200>,
- <0x29c0880 0x30>,
- <0x29cc100 0x534>,
- <0x2808000 0x24>,
- <0x2980080 0x8>;
- reg-names = "ctrl",
- "xhci_ec",
- "xhci_gbl",
- "usb_phy",
- "usb_mdio";
- brcm,ioc = <0x0>;
- brcm,ipp = <0x0>;
- compatible = "brcm,bcm7211-usb-phy";
- interrupts = <0x30>;
- interrupt-parent = <&vpu_intr1_nosec_intc>;
- interrupt-names = "wake";
- #phy-cells = <0x1>;
- brcm,has-xhci;
- syscon-piarbctl = <&syscon_piarbctl>;
- clocks = <&scmi_clk 256>;
- clock-names = "sw_usb";
-};
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
new file mode 100644
index 000000000000..1dad1e3df1a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB PHY
+
+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
+
+maintainers:
+ - Al Cooper <alcooperx at gmail.com>
+ - Rafał Miłecki <rafal at milecki.pl>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm7211-usb-phy
+ - brcm,bcm7216-usb-phy
+ - brcm,brcmstb-usb-phy
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: sw_usb
+ - const: sw_usb3
+
+ interrupts:
+ description: wakeup interrupt
+
+ interrupt-names:
+ const: wake
+
+ brcm,ipp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Invert Port Power
+ minimum: 0
+ maximum: 1
+
+ brcm,ioc:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Invert Over Current detection
+ minimum: 0
+ maximum: 1
+
+ dr_mode:
+ description: PHY Device mode. If this property is not defined, the PHY will
+ default to "host" mode.
+ enum:
+ - host
+ - peripheral
+ - drd
+ - typec-pd
+
+ brcm,syscon-piarbctl:
+ description: phandle to syscon for handling config registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ brcm,has-xhci:
+ description: Indicates the PHY has an XHCI PHY.
+ type: boolean
+
+ brcm,has-eohci:
+ description: Indicates the PHY has an EHCI/OHCI PHY.
+ type: boolean
+
+ "#phy-cells":
+ description: |
+ Cell allows setting the type of the PHY. Possible values are:
+ - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+ - PHY_TYPE_USB3 for USB3.x PHY
+ const: 1
+
+required:
+ - reg
+ - "#phy-cells"
+
+anyOf:
+ - required:
+ - brcm,has-xhci
+ - required:
+ - brcm,has-eohci
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,brcmstb-usb-phy
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: the base CTRL register
+ - description: XHCI EC register
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7211-usb-phy
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 6
+ items:
+ - description: the base CTRL register
+ - description: XHCI EC register
+ - description: XHCI GBL register
+ - description: USB PHY register
+ - description: USB MDIO register
+ - description: BDC register
+ reg-names:
+ minItems: 5
+ maxItems: 6
+ items:
+ - const: ctrl
+ - const: xhci_ec
+ - const: xhci_gbl
+ - const: usb_phy
+ - const: usb_mdio
+ - const: bdc_ec
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7216-usb-phy
+ then:
+ properties:
+ reg:
+ minItems: 3
+ maxItems: 3
+ items:
+ - description: the base CTRL register
+ - description: XHCI EC register
+ - description: XHCI GBL register
+ reg-names:
+ minItems: 3
+ maxItems: 3
+ items:
+ - const: ctrl
+ - const: xhci_ec
+ - const: xhci_gbl
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+
+ usb-phy at f0470200 {
+ compatible = "brcm,brcmstb-usb-phy";
+ reg = <0xf0470200 0xb8>,
+ <0xf0471940 0x6c0>;
+ #phy-cells = <1>;
+ dr_mode = "host";
+ brcm,ioc = <1>;
+ brcm,ipp = <1>;
+ brcm,has-xhci;
+ brcm,has-eohci;
+ clocks = <&usb20>, <&usb30>;
+ clock-names = "sw_usb", "sw_usb3";
+ };
+ - |
+ #include <dt-bindings/phy/phy.h>
+
+ usb-phy at 29f0200 {
+ compatible = "brcm,bcm7211-usb-phy";
+ reg = <0x29f0200 0x200>,
+ <0x29c0880 0x30>,
+ <0x29cc100 0x534>,
+ <0x2808000 0x24>,
+ <0x2980080 0x8>;
+ reg-names = "ctrl",
+ "xhci_ec",
+ "xhci_gbl",
+ "usb_phy",
+ "usb_mdio";
+ brcm,ioc = <0x0>;
+ brcm,ipp = <0x0>;
+ interrupts = <0x30>;
+ interrupt-parent = <&vpu_intr1_nosec_intc>;
+ interrupt-names = "wake";
+ #phy-cells = <0x1>;
+ brcm,has-xhci;
+ syscon-piarbctl = <&syscon_piarbctl>;
+ clocks = <&scmi_clk 256>;
+ clock-names = "sw_usb";
+ };
--
2.26.2
More information about the linux-arm-kernel
mailing list