[PATCH] arm64: dts: mediatek: Add Mediatek mt8192 cpufreq device nodes
Andrew-sh.Cheng
andrew-sh.cheng at mediatek.com
Sun Dec 20 22:36:54 EST 2020
From: "Andrew-sh.Cheng" <andrew-sh.cheng at mediatek.com>
This patch depends on [1] and [2].
[1]http://lists.infradead.org/pipermail/linux-mediatek/2020-November/019378.html
[2]https://patchwork.kernel.org/project/linux-mediatek/patch/1607586516-6547-3-git-send-email-hector.yuan@mediatek.com/
Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng at mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69d45c7..770f7d8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -39,6 +39,7 @@
compatible = "arm,cortex-a55";
reg = <0x000>;
enable-method = "psci";
+ performance-domain = <&performance 0>;
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
@@ -49,6 +50,7 @@
compatible = "arm,cortex-a55";
reg = <0x100>;
enable-method = "psci";
+ performance-domain = <&performance 0>;
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
@@ -59,6 +61,7 @@
compatible = "arm,cortex-a55";
reg = <0x200>;
enable-method = "psci";
+ performance-domain = <&performance 0>;
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
@@ -69,6 +72,7 @@
compatible = "arm,cortex-a55";
reg = <0x300>;
enable-method = "psci";
+ performance-domain = <&performance 0>;
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
@@ -79,6 +83,7 @@
compatible = "arm,cortex-a76";
reg = <0x400>;
enable-method = "psci";
+ performance-domain = <&performance 1>;
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
@@ -89,6 +94,7 @@
compatible = "arm,cortex-a76";
reg = <0x500>;
enable-method = "psci";
+ performance-domain = <&performance 1>;
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
@@ -99,6 +105,7 @@
compatible = "arm,cortex-a76";
reg = <0x600>;
enable-method = "psci";
+ performance-domain = <&performance 1>;
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
@@ -109,6 +116,7 @@
compatible = "arm,cortex-a76";
reg = <0x700>;
enable-method = "psci";
+ performance-domain = <&performance 1>;
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
@@ -194,6 +202,12 @@
compatible = "simple-bus";
ranges;
+ performance: performance-controller at 0011bc00 {
+ compatible = "mediatek,cpufreq-hw";
+ reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+ #performance-domain-cells = <1>;
+ };
+
gic: interrupt-controller at c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list