[PATCH 4/4] arm64: dts: add support for Marvell cn9130-crb platform

[Andrew Lunn]

On Tue, Dec 15, 2020 at 05:14:21PM +0200, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>

Hi Konstantin

> The Marvell reference platform CN9130-CRB is a small form factor
> board in a metal case. The platform is based on CN9130 SoC with
> addition of 8 Gigabit ports SOHO Ethernet switch.
> The reference platform features the following:
> * Up to 4 CPU cores ARMv8 Cortex-A72 CPU
> * CPU core operating speed of up to 2.2GHz
> * DDR4 DIMM – 8GB 64bit+ECC @ 2400Mhz.
> * 1x eMMC 8GB device
> * 1x uSD card 4 bits port on CP
> * 1x 128MB SPI NOR flash memory
> * 1x USB 3.0 Host port (Type A)
> * 1x SATA Gen3 via M.2
> * 1x USB 3.0 via M.2
> * 1x SIM card slot
> * 1x 1G Ethernet port via RGMII
> * 1x 10G port over SFP+ connector

I don't see the SFP device.

> * 8x 1G ports through switch via XFI

Nor the switch. What switch is it? 

    Andrew