[PATCH v1 1/6] dt-bindings: ARM: add bindings for the Meraki MR32

[Florian Fainelli]

On 8/18/2020 12:51 PM, Florian Fainelli wrote:
> 
> 
> On 8/18/2020 9:39 AM, Christian Lamparter wrote:
>> This patch adds the bindings for the Meraki MR32's SoC BCM53016.
>> Broadcom lists them all under the BCM5301x umbrella on their side:
>>
>> <https://www.broadcom.com/products/embedded-and-networking-processors/communications/bcm5301x> 
>>
>>
>> "BCM53012 and BCM53016 with dual-core Cortex-A9 CPU at 1 GHz, 256KB L2 
>> cache,
>>   16-bit DDR2 interface, USB3 integrated switch, GPHYs and packet 
>> accelerator".
>>
>> This patch also adds the "Meraki" vendor. It's wikipedia article 
>> states that
>> <https://en.wikipedia.org/wiki/Cisco_Meraki> Meraki was a start-up, 
>> founded
>> in 2006 as based in part on the MIT Roofnet Project. In 2012 Cisco 
>> Systems
>> bought the whole joint and kept the "Meraki" branding around to this day.
>>
>> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
>> ---
>>   Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 2 ++
>>   Documentation/devicetree/bindings/vendor-prefixes.yaml      | 2 ++
> 
> Can you separate out the vendor-prefixes.yaml change from the board 
> change? Rob could probably fast track the vendor prefix, while we will 
> have to wait for the 5.10 window to merge your changes.

Also, please provide a cover-letter such that all patches appear as a 
reply to your cover letter, this makes it easier for threading in mail 
clients, thanks!
-- 
Florian