[PATCH v1 1/6] dt-bindings: ARM: add bindings for the Meraki MR32

[Florian Fainelli]

On 8/18/2020 9:39 AM, Christian Lamparter wrote:
> This patch adds the bindings for the Meraki MR32's SoC BCM53016.
> Broadcom lists them all under the BCM5301x umbrella on their side:
> 
> <https://www.broadcom.com/products/embedded-and-networking-processors/communications/bcm5301x>
> 
> "BCM53012 and BCM53016 with dual-core Cortex-A9 CPU at 1 GHz, 256KB L2 cache,
>   16-bit DDR2 interface, USB3 integrated switch, GPHYs and packet accelerator".
> 
> This patch also adds the "Meraki" vendor. It's wikipedia article states that
> <https://en.wikipedia.org/wiki/Cisco_Meraki> Meraki was a start-up, founded
> in 2006 as based in part on the MIT Roofnet Project. In 2012 Cisco Systems
> bought the whole joint and kept the "Meraki" branding around to this day.
> 
> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
> ---
>   Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 2 ++
>   Documentation/devicetree/bindings/vendor-prefixes.yaml      | 2 ++

Can you separate out the vendor-prefixes.yaml change from the board 
change? Rob could probably fast track the vendor prefix, while we will 
have to wait for the 5.10 window to merge your changes.

Thanks
-- 
Florian