[PATCH v9 0/2] Initial Allwinner V3s CSI Support

Yong yong.deng at magewell.com
Thu May 3 18:19:40 PDT 2018


Hi Maxime,

On Thu, 3 May 2018 19:14:10 +0200
Maxime Ripard <maxime.ripard at bootlin.com> wrote:

> Hi Yong,
> 
> On Tue, Mar 06, 2018 at 09:51:10AM +0800, Yong Deng wrote:
> > This patchset add initial support for Allwinner V3s CSI.
> > 
> > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> > interface and CSI1 is used for parallel interface. This is not
> > documented in datasheet but by test and guess.
> > 
> > This patchset implement a v4l2 framework driver and add a binding 
> > documentation for it. 
> > 
> > Currently, the driver only support the parallel interface. And has been
> > tested with a BT1120 signal which generating from FPGA. The following
> > fetures are not support with this patchset:
> >   - ISP 
> >   - MIPI-CSI2
> >   - Master clock for camera sensor
> >   - Power regulator for the front end IC
> 
> Do you plan on sending another version some time soon? It would be
> awesome to have this in 4.18.

I was waiting for Sakari Ailus's feedback. But ...
I will send a new version soon. But not all suggestion from Sakari Ailus
would be accepted.

> 
> Thanks!
> Maxime
> 
> -- 
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com


Thanks,
Yong



More information about the linux-arm-kernel mailing list