[PATCH v9 0/2] Initial Allwinner V3s CSI Support

[Maxime Ripard]

Hi Yong,

On Tue, Mar 06, 2018 at 09:51:10AM +0800, Yong Deng wrote:
> This patchset add initial support for Allwinner V3s CSI.
> 
> Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> interface and CSI1 is used for parallel interface. This is not
> documented in datasheet but by test and guess.
> 
> This patchset implement a v4l2 framework driver and add a binding 
> documentation for it. 
> 
> Currently, the driver only support the parallel interface. And has been
> tested with a BT1120 signal which generating from FPGA. The following
> fetures are not support with this patchset:
>   - ISP 
>   - MIPI-CSI2
>   - Master clock for camera sensor
>   - Power regulator for the front end IC

Do you plan on sending another version some time soon? It would be
awesome to have this in 4.18.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com